www.Diamond-Models.gr

Diamond-Models
Δημοσιεύσεις: 458
Εγγραφή: Τρί Οκτ 26, 2010 3:46 pm

Απάντηση: www.Diamond-Models.gr

Δημοσίευση από Diamond-Models »

ΕικόναΕικόναΕικόναΕικόναRipmax Sigma EQ Mini AC/DC Charger (Euro) https://scontent-cdg2-1.xx.fbcdn.net/hphotos-xtl1/v/t1.0-9/1908230_1735407026696943_2229747144816549034_n.jpg?oh=a4acfc0c285b20bb4afa6e7669e22d1b&oe=574D0269 https://scontent-cdg2-1.xx.fbcdn.net/hphotos-xlp1/v/t1.0-9/1655889_1735407060030273_2446460656393940599_n.jpg?oh=a328f42096d66955958f5c1a77be18b4&oe=57885DE4 https://scontent-cdg2-1.xx.fbcdn.net/hphotos-xla1/v/t1.0-9/10157247_1735407110030268_3270072196101501790_n.jpg?oh=7fbd427a748b354b356d4653262bb88f&oe=579775C9 https://scontent-cdg2-1.xx.fbcdn.net/hphotos-xat1/v/t1.0-9/10346593_1735407066696939_2328228080723377407_n.jpg?oh=5798ebfafc4fc856ea2013db62cd78b9&oe=57932AF2 The perfect 'no frills' charger for beginners and club modellers alike. Capable of charging Li-Po, Li-Fe, Nimh, Nicad, and Lead Acid batteries from 0.1 to 4.5A with balancing for the relevant Lithium technology plus Delta peak for Nimh and Nicad. That's a 1-4S Li-Po/Fife, a 1-10S Nimh/Nicad or a 6-12v Lead acid. The internal circuitry is limited to 45W and the current is automatically limited to prevent exceeding this, if the selected current is higher. Balancing accuracy is 5mv per cell (Lithium) and delta Peak accuracy 8mv for Nicad and 5mv for Nimh. Input power can be DC (11-15v) or AC (100-240v), making the choice of power very flexible, depending on whether you are at home or at the field/track/lake. It is fully protected for current overload and reverse output polarity. The outer case is fully metal for durability and a 'quality' look/feel. Supplied with a special multi plug balance adaptor board compatible with XH, TP, EH and PQ plugs on the one board. There is no need to buy another board to have full compatibility with all Lithium balance connectors. One main output lead is provided with a male 'T' connector on it already, making the Sigma EQ Mini easy to use with many of the ARTF models now on the market. Note: There is a mistake in the instructions on this charger, where it says 'High-performance rapid charger/discharger'' it is wrong, there is no battery discharge function. Specification Weight: 230g Dimensions: 110 x 93 x 39mm
Diamond-Models
Δημοσιεύσεις: 458
Εγγραφή: Τρί Οκτ 26, 2010 3:46 pm

Απάντηση: www.Diamond-Models.gr

Δημοσίευση από Diamond-Models »

Νέες παραλαβές Απριλίου

Εικόνα
Εικόνα
Εικόνα
Εικόνα
Diamond-Models
Δημοσιεύσεις: 458
Εγγραφή: Τρί Οκτ 26, 2010 3:46 pm

Απάντηση: www.Diamond-Models.gr

Δημοσίευση από Diamond-Models »

Εικόνα
Εικόνα
Εικόνα
Εικόνα
Diamond-Models
Δημοσιεύσεις: 458
Εγγραφή: Τρί Οκτ 26, 2010 3:46 pm

Απάντηση: www.Diamond-Models.gr

Δημοσίευση από Diamond-Models »

Εικόνα
Ευχόμαστε Ολόψυχα σε Όλους

Καλή Ανάσταση και Χρόνια Πολλά.!!!
Diamond-Models
Δημοσιεύσεις: 458
Εγγραφή: Τρί Οκτ 26, 2010 3:46 pm

Απάντηση: www.Diamond-Models.gr

Δημοσίευση από Diamond-Models »

ΕικόναΕικόναΕικόναΕικόναΝέες Παραλαβές Μαίου απο www.diamond-models.gr PHOENIX MODEL Extra 300S .40-.55 ARF plane https://scontent-cdg2-1.xx.fbcdn.net/v/t1.0-9/13240576_1765390540365258_8353337007208030570_n.jpg?oh=1d7e10fb56ad27e9b3fb1ca01298b46d&oe=57D01E1E https://scontent-cdg2-1.xx.fbcdn.net/v/t1.0-9/13239212_1765390473698598_6482394488132489121_n.jpg?oh=e3fcb5f0725b7c7d65c30603099a9f97&oe=57E76A34 The Extra 300S has won the World Aerobatic Championship many times. The full size version flies aerobatics at 300km/h. Phoenixʼs Extra is naturally slower but is engineered to perform equally thrilling maneuvers! scale-like model able to perform flat spin, knife edge and many other difficult aerobatics. The Extra 300S is expertly handcrafted from balsa and plywood using only epoxy and CA glues. You can fly this plane after few hours of installation. All the hardware are included (servo wire, fuel tank, wheel/landing gear, etc). You only need to separately purchase the nitro engine and radio system. Features: Covered in genuine ORACOVER Removable top hatch Makes flight battery installation easy for Electric power option Plug in wings for convenient transportation and storage Huge access bay for radio installation Eletric conversion part included with the kit High quality hardware included Airfoil section on tail surfaces for added stability Scale landing gear with high grade aluminium Super finishing wheel pant and fiber glass cowl Requires: Engine: 2-stroke .40-.55 cu in (6.55 - 9.01 cm3) 4-channel radio with compatible receiver 5 Servos Manufacturer stock No. PH009 Technical data Length: 1295 mm Wingspan: 1452 mm Weight: 2760 g PHOENIX MODEL Diabolo .60 ARF plane http://www.diamond-models.gr/images/detailed_images/product-24785146402360957433a39edf42.jpg http://www.diamond-models.gr/images/detailed_images/Diabolo61.jpg The Diabolo is a beautifully finished aerobatic airplane with nice and simple construction. It comes pre-covered in an eye-catching design, you donʼt even need to spend any time for further decoration since all the complicated painting is finished by the factory. Featuring all balsa construction (fuselage, wings and tails), the Diabolo is light but extremely strong. It is completely built, requiring minimum assembly. The Diabolo is a great plane very well made and very enjoyable. Features: Quality materials and genuine ORACOVER covering Bolt-on two-piece wing for easy transport and setup at the field Removable top hatch for easy access to the interior of the plane Extremely lightweight laser-cut all-wood construction Durable factory-painted fiberglass cowl and wheel pants Can be converted for electric flight Prepainted pilot figure, preinstalled in cockpit Flies with a wide variety of engines Can be flight ready in just 2 to 4 hours Colour chart: White (21-010) Ferrari Red (21-023) Cub Yellow (21-030) Dark Blue (21-052) Sky Blue (21-053) Requires: Engine: 2-stroke .60 cu in (9.83cm3) 4~9 channel radio with compatible receiver 6 Servos Hitorque Manufacturer stock No. PH044 Technical data Length: 1260 mm Wingspan: 1620 mm Weight: 3200 g
Diamond-Models
Δημοσιεύσεις: 458
Εγγραφή: Τρί Οκτ 26, 2010 3:46 pm

Απάντηση: www.Diamond-Models.gr

Δημοσίευση από Diamond-Models »

ΕικόναΕικόναΕικόναΕικόναPHOENIX MODEL Sbach .46 - .55 ARF plane Wingspan:1405 mm http://www.diamond-models.gr/images/detailed_images/PH096_Sbach_Chinh.jpg http://www.diamond-models.gr/images/detailed_images/8c12731f-c0d7-41ec-b34a-051b2632f6e0-PH096-Sbach-14.jpg Introducing Phoenixʼs Sbach 342 is naturally slower but is engineered to perform equally thrilling maneuvers! scale-like model able to perform flat spin, knife edge and many other difficult aerobatics. The Sbach is expertly handcrafted from balsa and plywood using only epoxy and CA glues. You can fly this plane after few hours of installation. All the hardware are included (servo wire, fuel tank, wheel/landing gear, etc). You only need to separately purchase the nitro engine and radio system Technical data - Wingspan: 1405mm (55.3 in) - Length: 1405mm (55.3 in) - Flying weight: 2800-3000 gr - Wing area: 39.4 dm2 - Wing loading: 71g/dm2 - Wing type: Naca airfoils - Covering type: Genuine ORACOVER® - Gear type: Aluminum Hi-grade for main gear and spring wire for tail gear (included) - Spinner size: Plastic 58mm (included) - Radio: 4 channel minimum (not included) - Servo: 5 standard servo: 2 aileron; 1 elevator; 1 rudder; 1 throttle (not included) - Recommended receiver battery: 4.8-6V / 800-1200mAh NiMH (not included) - Servo mount: 21mm x 42 mm - Propeller: suit with your engine - Engine: .46-.55 / 2-stroke or .52/4-stroke glow engine (not included) - Motor: brushless outrunner 1000-1400 W, 480 KV (not included) - Gravity CG: 95-100 mm (3.7-3.9 in) Back from the leading edge of the wing, at the fuselage - Control throw Ailerons: Low: 10mm up/down, 10% expo; High: 12mm up/down, 10% expo - Control throw Elevators: Low: 10mm up/down, 12% expo; High: 12mm up/down, 12% expo - Control throw Rudder: Low: 25mm right/left, 15% expo; High: 40mm right/left, 15% expo - Experience level: Intermediate - Plane type: Scale Aerobatic RECOMMENDED MOTOR AND BATTERY SET UP - Motor: RIMFIRE .46-.55 (not included) - Lipo cell: 6 cells / 4000 – 5500mAh (not included) - Esc: 50-70A (not included) Feature - Designed for compatibility with both GP and EP flight - Covered in genuine ORACOVER® - Bolt-on two-piece wing for easy transport and setup at the field - Removable canopy for easy change lipo battery and set up radio - Strong Light Weight Construction - High-quality hardware package included MX-2 Wingspan:1210 mm2,4 GHz Ready to fly http://www.diamond-models.gr/images/detailed_images/samolot-mx-2-24-ghz-rtf-mode-2-r-planes.jpg http://www.diamond-models.gr/images/detailed_images/foto_add-44503.jpg RTF version - a complete set of the plane of complex equipment. The kit RTF includes the following elements: - Complete model in ARF version - 5-channel transmitter T5-AR 2.4 GHz with 6-channel receiver-T6 AR 2.4 GHz Mode 2 (gas left) - Brushless motor with electronic speed controller - Hub / cap with propeller - Installed in the model servos with the necessary extensions - Package Lithium-Polymer power model with a capacity of 1750mAh and voltage 11,1V and charger for 2 or 3-intentional packet Li-Pol, supplied from 12V - A set of small accessories (hinges, ski lifts, etc.), bolts and tappets - Manual in Polish Aerobatic aircraft "MX-2" Wingspan: 1210 mm Hull length: 1,106 mm Wing area: 27.3 dm2 Load wings: 35.16 g / dm 2 Takeoff weight: 960 g The level of play - for intermediate and experienced modelers
Diamond-Models
Δημοσιεύσεις: 458
Εγγραφή: Τρί Οκτ 26, 2010 3:46 pm

Απάντηση: www.Diamond-Models.gr

Δημοσίευση από Diamond-Models »

ΕικόναΕικόναΕικόναΕικόναΝέα Παραλαβή σε Racer FPV Ready PnP MANTIS 280 RACE PNP Carbon-Frame CC3D LED Kamera 5,8 GHz FPV https://scontent-cdg2-1.xx.fbcdn.net/v/t1.0-9/13267737_1767193436851635_1675301957962977218_n.jpg?oh=c55350454ede399266fcda962c741433&oe=57E2ECB6 https://scontent-cdg2-1.xx.fbcdn.net/v/t1.0-9/13256342_1767193046851674_5998324146316558016_n.jpg?oh=a0a62875a96b0cb642a4de12d71ad300&oe=57C92B33 https://scontent-cdg2-1.xx.fbcdn.net/v/t1.0-9/13320015_1767193433518302_5835022986930911060_n.jpg?oh=7d9b669f8f5c8feeaf21a9d6f65f9a74&oe=57DCDBE1 https://scontent-cdg2-1.xx.fbcdn.net/v/t1.0-9/13267797_1767193116851667_8204795732961797336_n.jpg?oh=d78ce9d65fc3999e1dc51ce31f568e93&oe=57DABA22 The MANTIS 280 RACE is a race for the first-person view (FPV) conceived Quadrokopter with carbon frame. Four brushless motors of the type 2204 with 2,300 U / min / V (KV), four brushless controllers up to 12 A continuous current, the CC3D electronics,a module for the transmission in 5.8 GHz and a camera are already mounted ready for operation. Also incorporated are the two large LED head lights front and a long light bar behind the model. Of course, four white and four black propellers 5 x 3 "included. The dimensions of the multicopter be 220 x 233 x 50 mm, the four rotor arms each 140 mm long,in the diagonal distance between the motors is 280 mm , The associated ADRIFT VR FPV glasses whose comfort and design convinced has an adjustable 3-point head strap reduces the unpleasant during longer bear pressure points on the head. The dimensions of the VR ADRIFT be 148 x 176 x 102 mm and has an aspect ratio of 4: 3 with a resolution of 480 x 272 pixels. In addition, multiple languages ​​such. B. English, German, French or Italian for the interface can be selected. Required accessories: 3S Lipo battery 1350mAh
Απάντηση

Επιστροφή στο “Καταστήματα - Εισαγωγές/Greek RC stores”