www.Diamond-Models.gr
-
- Δημοσιεύσεις: 458
- Εγγραφή: Τρί Οκτ 26, 2010 3:46 pm
-
- Δημοσιεύσεις: 458
- Εγγραφή: Τρί Οκτ 26, 2010 3:46 pm
-
- Δημοσιεύσεις: 458
- Εγγραφή: Τρί Οκτ 26, 2010 3:46 pm
Απάντηση: www.Diamond-Models.gr
Description
- Individual parts such as wings, fuselage, and tailplane precovered with foil
- GRP motor cowl pre-painted
- Vacuum-moulded cockpit canopy and wheel spats
- Pre-painted pilot figure
- Pre-formed undercarriage components
- Soft rubber wheels for main landing gear and tailwheel
- Accessories for rudder linkage
- Comprehensive assembly instructions in German, English, and French
spare parts
accessory
Recommended drive set
Information
- Realistic semiscale model
- ARTF (Almost Ready to Fly)
- Simple battery change via removable fuselage top
- Separable airfoil
RC functions
Rudder Elevators Ailerons Engine rpms
Specification
Wing area : 17,5 dm² All-up weight, approx.: 850 g Total surface area, approx. : 21,4 dm² Tailplane area : 3,9 dm² Overall length, approx.: 900 mm Wingspan approx.: 1000 mm Wing loading : 40 g/dm²
-
- Δημοσιεύσεις: 458
- Εγγραφή: Τρί Οκτ 26, 2010 3:46 pm
Απάντηση: www.Diamond-Models.gr
Description
- Almost ready to fly (ARTF) model made of Graupner SOLIDPOR® high-density foam parts
- CNC-machined, carbon-look cockpit canopy included
- ABS finished parts, such as motor mount, precision spinner, and CAM FOLDING PROP included in the package
- Separable airfoil with CRP strut
- No painting required
- Detailed instructions with photos of the construction stages
spare parts
accessory
Information
- Masterful appearance with T-tailplane
- The model offers outstanding gliding characteristics with the motor shut off
RC functions
Rudder Elevators Ailerons/airbrakes Engine rpms
Specification
Wing area : 33,3 dm² All-up weight, approx.: 950 g Total surface area, approx. : 38 dm² Tailplane area : 4,7 dm² Overall length, approx.: 1120 mm Wingspan approx.: 1900 mm Wing loading : 25 g/dm²
-
- Δημοσιεύσεις: 458
- Εγγραφή: Τρί Οκτ 26, 2010 3:46 pm
-
- Δημοσιεύσεις: 458
- Εγγραφή: Τρί Οκτ 26, 2010 3:46 pm
Απάντηση: www.Diamond-Models.gr
Description
- Model of high-density foam
- Matt-painted finish in attractive fighter jet camouflage
- High-quality brushless motor, Speed controller, three-blade propeller and spinner installed
- 4 servos already installed and ready to fly
- Graupner 500 mAh/7.4V LiPo battery included
- Easy-to-remove upper part of fuselage with magnetic closure
spare parts
Info
Outstandingly detailed semi-scale model of the best fighter aircraft of its generation, built starting in 1941 to 1945 The Focke-Wulf Fw 190 A was equipped with the 1560 hp BMW 801 C-1 engine and had a top speed of 665 km/h
Information
- Semiscale Model Ready for HoTT
- Small model equipped with numerous details
- Outstanding flight characteristics and high flight speed
- Full aerobatic capability
- LiPo battery can be changed via removable upper fuselage part
RC functions
Rudder Elevators Ailerons Rpms
Specification
All-up weight, approx.: 200 g Wingspan approx.: 550 mm
-
- Δημοσιεύσεις: 458
- Εγγραφή: Τρί Οκτ 26, 2010 3:46 pm
Απάντηση: www.Diamond-Models.gr
Wing span: 60 in / 1524 mm
Wing area: 1295 sq in / 84 sq dm Flying weight: 11lb / 5000g
Fuselage length: 53 in / 1346 mm
Engine Required: 26cc-32cc Benzin motor
Radio Required: 4-5channels, 5-6servos
-
- Δημοσιεύσεις: 458
- Εγγραφή: Τρί Οκτ 26, 2010 3:46 pm
Απάντηση: www.Diamond-Models.gr
Description
Single-seater erobatic aircraft manufactured by Silence Aircraft using carbon-fiber honeycomb sandwich technology. The result is an extremely low takeoff mass coupled with maximum rigidity. The generous cockpit canopy gives the pilot very good all-around vision. The model has docile flight characteristics and a broad speed range. The generous dimensions of the landing flaps make it possible to do soft landings on the mechanical undercarriage. Thanks to the bright LEDs already installed on the wingtips, it is easier to recognise the flight position of the model. Both internal combustion and electric motors can be installed.
- ARTF model (almost ready to fly)
- Control of rudder and elevators via DSS system
- Complete balsa/plywood design
- Laser-cut individual parts
- Fuselage, tailplane, and wings pre-covered with multicolored foil
- GRP motor cowl
- Wheels and small parts for rudder linkage
- ALU Mechanical RETRACTS undercarriage and ALU Strats are included
- Coverings for wings,rudder & elevator are included
- Pilot ,Spenner& Propeller are included
Information
- DSS-System
- (Direct Steering System)
- Wings removable for transport
- Retractable undercarriage with shock absorbers
- Friendly flying characteristics
- Aileron, elevator, and rudder with locking design
RC functions
Rudder Elevators Ailerons Airbrakes Speed control Retractable undercarriage
Specification
Tailplane section: 7,5 Wing area : 37 dm² All-up weight, approx.: ab 4100 g Total surface area, approx. : 44,5 dm²
Engine : Electric or .90 2T--1.20 4T Overall length, approx.: 1430 mm Wingspan approx.: 1700 mm
Description
- Vario with altitude signals and 5 climb/drop signals each
- Additional warning thresholds for minimum altitude, maximum altitude, climb/drop speed in two stages
- Altitude display and storage of minimum and maximum altitude
- Warning time can be set to: OFF, 5, 10, 15, 20, 25, 30 seconds, always
- Warning repeat time can be set to: always, 1, 2, 3, 4, 5 minutes, once
- The GPS/Vario sensor can be connected directly to the telemetry output of the receiver
Important Note when using the modules 33600, 33601, 33610, 33611 and 33620: Do not carry out any programming work on the sensors while the model is flying, otherwise there is a real risk that your model will fly out of control while you are not concentrating on it! If your model is fitted with two or more receivers, it is absolutely essential that you do not carry out programming work during a flight, as this can alter the settings in the receivers to which no telemetry equipment is connected; in the worst case this could result in the model crashing! For this reason always carry out programming on the ground, and check that only the receiver with connected sensors is powered on. Technical data Vario:
- Altitude measurement: -500 ... +3000 m
- Resolution: 0.1m
- Sensitivity of Vario: 0.5 m / 3s, 1 m / 3 s, 0.5 m / s, 1 m / 1 s, 3 m / s per ton programmable
- Calculation of mean: 4 - 20 measurements per measured value can be programmed
Graupner LiPo 2/3000 7,4V JR-ST for receivers Τιμή: 34.90
Description
For use with magnetic switch operated On / Off switch with regulated 5.5 V or 5.9 V output voltage, Order No. 4133. Dimensions approx. 72 x 53 x 16 mm. Weight approx. 121 g.
Specification
Plug connector: JR Voltage: 7,4 V All-up weight, approx.: 121 g Rechargeable: schnell und normal Capacity: 3000 mAh Dimensions (LxWxH): 72 x 53 x 16 mm
-
- Δημοσιεύσεις: 458
- Εγγραφή: Τρί Οκτ 26, 2010 3:46 pm
-
- Δημοσιεύσεις: 458
- Εγγραφή: Τρί Οκτ 26, 2010 3:46 pm
Απάντηση: www.Diamond-Models.gr
Specification Wingspan: 1635mm (64.37") Length: 1200mm (47.24") Weight: 2.52kg (5.56 lb) Servos: 4 for GP and 3 for EP (all standard) Radio System: 4 Channel (Req.) Electric Motor:36 series (Req.) IC Engine: .40/.46 2-Stroke (Req.) Recommended Propeller: 12 x 9 3-Cell, 12 x 7 4-Cell, 11 x 6.46 LiPo: 3-4S 11.1-14.8V 4000mAh 25C (Req.) Speed Controller: 60A Brushless for EP (Req.)
-
- Δημοσιεύσεις: 458
- Εγγραφή: Τρί Οκτ 26, 2010 3:46 pm
Απάντηση: www.Diamond-Models.gr
Graupner WP RIVIERA incl. RC,without battery




Description
accessory
http://www.graupner.de/fileadmin/downloadcenter/pdf.gif
Information
RC functions
Rudder adjustment
Engine forward/reverse, proportional control
Specification
Beam, approx.: 180 mm
Scale: 1:32
Height, approx.: 210 mm
All-up weight, approx.: 1200 g
Overall length, approx.: 605 mm




Description
- Ready-to-Run (RTR) model
- Assembled and ready to go
- Propulsion system and remote control pre-installed
- Electronic speed controller
- Decals applied
- 2.4 GHz remote control
- Deep-drawn fuselage and deck; already glued together and painted
accessory
Information
- Realistic yacht model
- The special form of the boat means high speed
- Thanks to it size, functions can be added to the model as desired. There is nothing to limit your ideas
RC functions
Rudder adjustment
Engine forward/reverse, proportional control
Specification
Beam, approx.: 180 mm
Scale: 1:32
Height, approx.: 210 mm
All-up weight, approx.: 1200 g
Overall length, approx.: 605 mm
-
- Δημοσιεύσεις: 458
- Εγγραφή: Τρί Οκτ 26, 2010 3:46 pm
-
- Δημοσιεύσεις: 458
- Εγγραφή: Τρί Οκτ 26, 2010 3:46 pm
Απάντηση: www.Diamond-Models.gr
Specification
Wing Span: 2030mm / 80 in
Flying Weight: 5500 g - 6200g
Wing Area:1232sq in/80 sq dm
Fuselage Length:1920 mm /75.6 in
Engine Required: 50cc
Radio Required: 6 Channels ; 6-7 Servos
-
- Δημοσιεύσεις: 458
- Εγγραφή: Τρί Οκτ 26, 2010 3:46 pm
-
- Δημοσιεύσεις: 458
- Εγγραφή: Τρί Οκτ 26, 2010 3:46 pm