www.Diamond-Models.gr

[Diamond-Models]

http://www.diamond-models.gr/images/detailed_images/1cfa1b40b7.jpg
(mm)(g)(mm) http://www.diamond-models.gr/images/detailed_images/6e05f4a542.jpg http://www.diamond-models.gr/images/detailed_images/a311d1882a.jpg The Spitfire is a model of a Vintage Outboard Racing Boat, based on plans first published in 1956. Like the full-size vessel, our 1 : 5.2 scale model is of all-wood construction. All the mahogany and birch plywood parts are laser-cut, and the hull is quickly assembled on the building jig supplied in the kit. The kit contains all the wooden parts, fittings, covering and jig, plus etched German silver components. Scale 1:5,2 Length 585 Weight 1200 Width 260

[Diamond-Models]

Νέες Παραλαβές Απριλιος 2014 Ελικες Fialla Διάφορα μεγεθη http://www.diamond-models.gr/images/detailed_images/P1030854black135911696151027aa19fbc61395491237532d81a52867c.jpg Ripmax WOT 4-E Mk2 ARTF http://www.diamond-models.gr/images/detailed_images/A-CF0031396526830533d4eeeab45f.jpg http://www.diamond-models.gr/images/detailed_images/A-CF003_b.jpg Specification Wingspan: 1200mm (47.0") Length: 1050mm (41.0") Weight: 1450g (3.2lb) Radio System: 4 Channel with 4 Servos (Req.) Electric Motor: KMS 2820/05 (Req.) WP HoTT Fan 1800 RC BnF (Retractable Fan Unit) http://www.diamond-models.gr/images/detailed_images/9920.100_HoTT_FAN_008%5BWeb%20quality%5D.jpg http://www.diamond-models.gr/images/detailed_images/9920.100_HoTT_FAN_003%5BWeb%20quality%5D.jpg Specification The Graupner / SJ HoTT -FAN is a particularly attractive RC model. The HoTT FAN is equipped with a highly efficient impeller retractable engine . The engine gives the HoTT -FAN a very good climb performance , creating a pleasant turbine-like sound. The model his great idol the Super Salto by Bob Carlton This comes very close . The original plane is driven by a turbine 100 PBS TJ . As the larger model enthuse especially high speed space overflights in the lowest altitude. For landing the tremendously good glide can be compensated by the extension of the engine , which then serves as an air brake . The ARTF model comes almost ready to fly out of the package . After sliding the wing and screwing the V- tail unit , the model is already in all its beauty on the floor. By the HoTT receiver and LiPo battery connector (not included) , the model is ready to go. Package Contents Order No. 9920.100 Ready-made model from Graupner / SJ SOLIDPOR ® hard foam split wing with CFRP spar Finished hull with installed retractable engine and removable canopy. BRUSHLESS motor HPD 2512-5000 7.4 V , including BRUSHLESS CONTROL 22 impeller 58 mm ready installed . 4 pcs mini servos installed ready for use, glued decorative elements finished or painted. Detailed manual with detailed tips for the first flights included . information ARTF model Ready to fly in just a few minutes Attractive semi - scale design Full - art Airworthy Super climb performance with LiPo 3/1600 High-efficiency impeller retractable engine Ground bootable on smooth slopes No gluing required Very small transport dimensions 95x21x19 cm RC functions elevator rudder aileron Engine speed Retractable engine Specifications Tailplane section : NACA 008 Wing area : 22,6 dm ² Scale: 1:7.5 Approximate weight: 850 g Total surface area approx : 26.8 dm ² Tailplane : 4.2 dm ² Airfoil : Eppler E -195 Length approx : 810 mm Wingspan approx : 1800 mm Wing loading : 31.7 g / dm

[Diamond-Models]

YUKI Team Bonhomme Edge 540 PNP 1.095mm http://www.diamond-models.gr/images/detailed_images/Team-Bonhomme-Edge-540-PNP-1-095mm-171500_b_5.jpg http://www.diamond-models.gr/images/detailed_images/Team-Bonhomme-Edge-540-PNP-1-095mm-171500_b_2.jpg http://www.diamond-models.gr/images/detailed_images/bonhomme_576.png http://www.diamond-models.gr/images/detailed_images/Team-Bonhomme-Edge-540-PNP-1-095mm-171500_b_4.jpg Pure aerobatic fun promises the licensed team Bonhomme Edge 540 With the original double world champion Paul Bonhomme won the same the first Red Bull Air Race 2014 in the Master Class. The flight model is a strung with Oracover covering wood construction in a lightweight construction. With a span of 1,095 mm and about 730 g of the Edge 540 is therefore very compact. The flight model of the electric drive and four servos with metal gears are installed ready for use. Since the brushless controller WASABI ECO 35A is equipped with a XT60 plug, the separately available BRAINERGY 3S LiPo batteries are suitable as accessories ideal. The racer can be assembled ready to fly within minutes, this no adhesive is required. Technical data Scale: 1:6,8 Wingspan: 1.095 mm Length: 955 mm Weight: ca. 730 g Material: Holz Covering: ORACOVER Servos: 4 x 9 g (MG) Motor: BL 36 mm, 1.050 U/min/V (KV) Controller: WASABI ECO 35 A Functions Elevator: ja Rudder: ja Ailerons: ja Motor: ja Tail wheel: ja Scope of delivery Fuselage: bespannt Wing: bespannt Empennage: bespannt Drive: installiert Servos: installiert Landing gear: ja Instruction manual: Deutsch, Englisch Recommended accessories (not included) RC system: 4-Kanal Battery: LiPo 3s1p (11,1 V), 1.800-2.200 mAh

[Diamond-Models]

Schubeler DS-51-AXI HDS 90mm Carbon EDF Ducted Fan with carbon brackets preinstalled http://www.diamond-models.gr/images/detailed_images/schubeler-ds-51-axi-hds-90mm-carbon-edf-ducted-fan2.jpg http://www.diamond-models.gr/images/detailed_images/schubeler-ds-51-axi-hds-90mm-carbon-edf-ducted-fan1.jpg http://www.diamond-models.gr/images/detailed_images/schubeler-ds-51-axi-hds-90mm-carbon-edf-ducted-fan.jpg Schubeler DS-51-AXI HDS 90mm Carbon EDF Ducted Fan. For from 36 to 39mm motors. Over 6,5kg thrust power. Specifications: DS-51-AXI HDS (90mm) max rpm: 50.000 max power: 5350 W max static thrust: 64 N equivalent to around 6.5kg max efflux velocity: 101 m/s weight: 107 g max motor diameter: 36-39 mm for 5mm shaft diameter Some measurments examples : Typhoon HET 700-68-2100kv motor / 5S / 100A / Thrust 3,2kg Typhoon HET 650-68-1600kv motor / 6S / 68A / Thrust 2,8kg Typhoon HET 700-68-2100kv motor / 6S / 135A / Thrust 4,3kg Typhoon HET 700-68-1200kv motor / 8S / 54A / Thrust 3kg Typhoon HET 650-68-1130kv motor / 10S / 62A / Thrust 3,8kg Typhoon HET 700-68-1200kv motor / 10S / 78A / Thrust 4,3kg Schübeler HDS & HST manual (UK) Schübeler HDS and HST mounting and user manual (UK)

[Diamond-Models]

Vector Thrust System for 90mm EDF http://www.diamond-models.gr/images/detailed_images/vector-thrust-system-for-90mm-edf.jpg http://www.diamond-models.gr/images/detailed_images/vector-thrust-system-for-90mm-edfj.jpg http://www.diamond-models.gr/images/detailed_images/vector-thrust-system-for-90mm-edf%20n.jpg Vector Thrust System for 90mm EDF. All alloy articulated vector thrust system to reproduce and control vector thrust. The Thrust Vector Systen Is suitable For 90mm EDF Jet. It Is In 360 Degree TV And Using 2 Servo (not included), mixing with rudder and elevator by a Y vord or using seperate servo Channels. Specifications: Material: Alloy Weight: 47g without the wood ring (+5g with wood ring). Outside wood ring diameter: 104mm Inside wood ring diameter: 83mm 175mm push rod and screws included. Length (mm): 52 Weight (gr): 52 EDF Diameter (mm): 90 Note: 2 servos + linquage are required. Size and length depending upon your model.

[Diamond-Models]

Changesun 12 Blade 90mm EDF Ducted Fan + 1600kv V2 motor 6S http://www.diamond-models.gr/images/detailed_images/changesun-12-blade-90mm-edf-ducted-fan-1600kv-v2-motor.jpg http://www.diamond-models.gr/images/detailed_images/changesun-12-blade-90mm-edf-ducted-fan-1600kv-v2-motorf.jpg http://www.diamond-models.gr/images/detailed_images/changesun-12-blade-90mm-edf-ducted-fan-1600kv-v2-motorgf.jpg http://www.diamond-models.gr/images/detailed_images/changesun-12-blade-90mm-edf-ducted-fan-1600kv-v2-motorcc.jpg Changesun CS90 12 blade and 1600kv V2 brushless motor combo for 6s Lipos, 84A. Dynamically balanced. A high thrust and well designed Electric Ducted Fan unit for high power applications, the 12 blade arrangement makes for a quiet fan unit with an amazing sound, this is the closest you will ever get to the sound of a Turbine! This V2 will generate over 2,85kg of thrust. Changesun CS90 12 blade and 1600kv V2 brushless motor combo for 6s Lipos, 84A. Dynamically balanced. A high thrust and well designed Electric Ducted Fan unit for high power applications, the 12 blade arrangement makes for a quiet fan unit with an amazing sound, this is the closest you will ever get to the sound of a Turbine! This V2 will generate over 2,85kg of thrust. Description: Dynamically balanced in factory Outside Diameter: 93.5mm Rotor Diameter: 89mm 12 blades Weight : 410g with motor Material: Fibre Reinforced Nylon Rotor Spiner Material : Aluminium (silver color) Suitable motor 1600KV-1400KV 6S-8S (comes with a pre installled 1600kv V2 motor) Shaft adaptor to motor: 5mm Fan Max RPM: 45000 RPM With motor 1600KV for 6S Loading 84A, require a >100A ESC Warning: 12 bladed fans draw more amps than a normal 5 or 6 bladed normal edf unit please use a watt meter to ensure your don't burn up your motor and ESC. Check precisely your ESC capacity for this combo

[Diamond-Models]

Graupner WP FLASH 750 RC Electric PnP http://www.diamond-models.gr/images/detailed_images/00034013_w13971578205346efbc23ec6.jpg http://www.diamond-models.gr/images/detailed_images/00033569_w.jpg http://www.diamond-models.gr/images/detailed_images/00034562_w.jpg http://www.diamond-models.gr/images/detailed_images/00034012_w.jpg Specification Wing area : 15,5 dm² All-up weight, approx.: 620 g Overall length, approx.: 750 mm Wingspan approx.: 750 mm Wing loading : 40,0 g/dm² motor Graupner 3350Kv ESC Graupner 60Amps propeler 5"x5" plus spare propeller Battery needs: 11.1V 2200 mah 45c

[Diamond-Models]

E-retract XL-Alu Main 20Kg 2pcs http://www.diamond-models.gr/images/detailed_images/retrm.jpg - Electric retract set for airplanes and helicopters - The all in one system retract system require no complex linkages nor extra servo - The retracts are operated as a servo and connected to the receiver. - The 5th channel of the transmitter switches in or out the retracts. - The design allows an easy installation in almost every model. - The main retracts (2) and the steerable front retract (1) are sold separately. - The support blocks are made out of strong aluminium. - You will be surprised how good your airplane flies with its landing gear retracted A B C D E F G H I 92,7 43,5 52,0 22,0 35,9 Ø 8,0 43,0 31,0 3,0

[Diamond-Models]

Νέες Παραλαβές Μαίου
Black Horse L-39 Albatros 90mm EDF ARTF




The L-39 is the most widely used jet trainer in the world and has served with over 30 air forces. In addition to performing basic and advanced pilot training, it has also flown combat missions in a light-attack role.

Black Horse has managed to faithfully recreate this iconic jet using the clever lightweight CNC construction techniques they have become well known for. The fuselage features a hinged opening canopy and removable cockpit interior allowing a large access hatch for easy battery access. Black Horse paid extra attention to this cockpit on this model and used hand painted vac-form components to reproduce a very detailed cockpit area. The wing and tailplane halves plug in to the fuselage on an aluminium spar and are removable for easy transportation.

Supplied complete with mechanical retract units and tough CNC machined oleo legs. The sprung oleos help with ground handling and she copes well with grass surfaces.

The L-39 is designed to suit higher end 90mm electric ducted fan units and 8S battery setups. A good example would be a Wemotec 90mm Midi Fan Evo, HET 650-68-1500 motor, 120A HV ESC and a 8S 29.6v 6,000mAh Li-Po. It would also suit turbine conversions (no turbine information is supplied).

• Mechanical retracts, oleos and wheels included
• Detailed cockpit and pilot
• Balsa/Ply construction using advanced CNC techniques
• Covered with high quality Oracover film
Specification
Wingspan: 1,450mm

Length: 1,860mm
Weight: 4.3 - 4.6 kg

Servos: 8 (+3 Retract) (Req.)
Radio System: 8 Channel (Req.)

Electric Motor: from 1000kv-2000kv (Req.)
EDF Fan Diameter: 90mm (Req.)

Speed Controller: 85-HV--120A-6s (Rec.)
LiPo: 6s-10S 5,000-6,000mAh (Req.)
http://www.youtube.com/watch?v=rTa-Vr-JpdU

[Diamond-Models]

Νέες Παραλαβές Μαίου Pichler Modelbau HiSpeed PnP (Combo Set) RED http://www.diamond-models.gr/images/detailed_images/HiSpeed-Combo-Set.jpg When HiSpeed ​​is the strengthened version of the popular Speed ​​series . Those who have gained experience with the speed , can speak with the HiSpeed ​​ignite the next level. The HiSpeed ​​there (red, blue or yellow) in three different colors. The model was developed entirely in-house Pichler and flies literally as if on rails . Caution: The HiSpeed ​​has a very high addiction factor ! The model is controlled by elevator and ailerons and can be flown by anyone who can take off and land an aileron trainer safely. Although the HiSpeed ​​can fly really fast , it is still easy to control in every flight situation . It can be started easily from his hand and landed at a slow pace . As PNP Version ( Plug and Play ) You will receive the completed -covered model , perfectly matched brushless motor, brushless controller , fast mini servos and the matching high-performance propeller. * ARF model in timber construction ( Lasercut ) * Finish covered with printed film * Very low installation effort * One-piece wing * Small parts, illustrated instructions Specifications * span: 1000mm length: 920mm weight : 800g R / C Functions motor controller aileron elevator what included in the box servos 3 x MASTER Servo ( High Speed) Drive / electric 250 watt brushless power Accessories ( included) 1 x Brushless Motor PULSAR 36series 1100kv 1 x Brushless ESC PULSAR 40A 1 x Propeller APC 8x6 3 x MASTER servo 9gr Optional (recommended) LiPo battery 2200 at 11.1 V

[Diamond-Models]

Νέες Παραλαβές 29 Μαίου 2014 SUPER ΠΡΟΣΦΟΡΑ-KDS Innova 450QS Combo RTF with Alu caring case Τιμή: 289.99 http://www.diamond-models.gr/images/detailed_images/kds450qs-tile.jpg http://www.diamond-models.gr/images/detailed_images/kds450qs.jpg High strength plastic precision parts assembled. New design main rotor head, helicopter flexibility adjusted at will. With all electronics fixed and adjusted before packaging. Belt driving system, no noise of gear friction with higher efficiency. Simple assembling of frame, and easy to repair. Duplex beaing washout base arm provides more smoothly movement. Integrative landing skid design, and good anti-seismic capability. High compatibility of parts among KDS helicopters series. Comes with KDS820 gyro which won't produce any drifting. Equipped with excellent hand feel new KDS-7XII 2.4 GHz transmiter. Best choice for beginners. Technical Data plastic rotor head GF Blades 40A ESC KDS-WS2632 Motor 3500KV KDS Servo 9g (4 pieces) Gyro KDS KDS820 Li-Po 2200MAH 11.1V 20C KDS-3S charger KDS 2.4Ghz K-7XII Transmitter ALU Carring Case included The package contains: - KDS Innova 450 Flybar - KDS 3500 KV Brushless Motor - Blade - Blade Tail KDS - KDS ESC 40 A - KDS Servos 9 g - KDS 820 Head and hold dual rate gyro - Canopy - KDS LiPo battery 11.1 V 2200 mAh - Charger - KDS 7 ch 2.4 GHz TX - Mode 2 ALU Carring Case included Product Specifications: Length: 750 mm Height: 230 mm Length main blades: 315 mm Tail blades length: 62 mm Engine Sprocket: 14T Main gear: 100T Tail drive gear: 22T Reduction ratio: 5,6:1:4,6 Weight: 780 g (with motor)

[Diamond-Models]

SUPER ΠΡΟΣΦΟΡΑ-KDS Innova 450BD Flybar Combo RTF with Alu caring case Τιμή: 369.90 http://www.diamond-models.gr/images/detailed_images/KDS-450SD-FBL-RTF-1-tile.jpg http://www.diamond-models.gr/images/detailed_images/114013544155386f8af33d8d.jpg INNOVA 450 series are the latest developed helicopters for beginners of KDS MODEL; 450BD(Belt Driven) features an American-style rotor head, and the unique designed rotor head with multiple control mechanism make it possible to switch between flexible and stable flying mode. Streamline carbon body is full of motion, and the design of double-geared belt driven transmission makes it easy for maintenance. All power of the heli is from the high performance lipo (11.2v, 2200MAH, 20C lithium battery) with good quality. And then you just move and enjoy the high performance in the blue sky with proper use to the Lipo. The kit comes with high performance electronics; the INNOVA 450 RTF version with ailerons is equipped with KDS820 gyro (yaw rate gyro) and digital N590 (tail holding gyro), resulting the outstanding tail stability. The swash plate comes with metal gear digital servo N290, which features high-rate and anti-strike performance. The brushless ESC 40A with inner Lying Switch UBEC, and the brushless motor 3500kv make the power of the helicopter to achieve a perfect combination The thicker 15MM tail boom reduces the vibration effectively. High quality 325MM carbon fiber rotor blades and elegant hand-painted FG canopy make the helicopter more stunning and eye-catching. With the functional KDS-7XII radio, you can enjoy great flying feeling. Specifications & equipment Length?640mm Height: 220mm Width: 120mm Main Rotor: 315mm Main Rotor Diameter: 710mm Tail rotor Diameter: 155mm Motor Pinion: 13T Main Gear: 150T Autorotation Tail Drive Gear: 106T Tail Drive Gear: 25T Drive Gear Ratio:11.5:1:4.25 Weight(W/motor):870g BL ESC :40A BL motor: 3650KV Gyro: KDS820 dual rate and head lock gyro Servo: 3 N290 metal gear digital servos and 1 N590 digital servo Lipo: 11.1V 2200mAh 20C Charger: 3S charger and adapter Radio: K-7XII 7Ch 2.4Ghz RC sett Including Full Size Alu Carring Case

[Diamond-Models]

SUPER OFFER Tactic TTX650 6ch 2.4 Ghz Transmitter + 1SQ mini QUAD http://www.diamond-models.gr/images/detailed_images/tacj2650bs01g-lg-vert.jpg http://www.diamond-models.gr/images/detailed_images/tacj2650bs01g-lg14013523015386f06cf2fbd.jpg http://www.diamond-models.gr/images/detailed_images/tacj2650bs09g-pushbutton.jpg http://www.diamond-models.gr/images/detailed_images/tacj2650-switch.jpg Hereʼs what the TTX650 has to offer! 20 Model memory Easy-to-use pushbutton programming controls Intuitive, straightforward menus Large, easy-to-read graphing LCD screen with adjustable contrast User-selectable switch assignments 4 Programmable mixes and 8 pre-programmed mixes Airplane and helicopter programming Compatible with all SLT receivers and Tx-R aircraft Quad-bearing gimbals Adjustable stick length and tension Wireless trainer system with selectable channels Reversing, sub-trim and travel limits on all channels Dual rates and exponential (aileron, elevator, rudder) Digital trims with slow/fast adjustment One up/down timer, one battery timer Adjustable low-voltage alarm 4 "AA" alkaline batteries included Charge jack for optional NiCd/NiMH packs External antenna that rotates and folds for easy storage More ease. More choices. More fun. Why go with a Tx-R? Glad you asked. Start with speed and ease. Tx-R aircraft help you save time and get you to the flight line faster. They're assembled and finished and all onboard electronics are installed …including an SLT receiver. Take a Tx-R out of the box, and you're practically ready to fly. Now that's fast and easy. Add flexibility to the mix. With a Tx-R, you don't have to buy a special radio to fly. That's because all Tx-R aircraft come with an SLT receiver. And since they do, you have two very attractive choices. One, you can fly a Tx-R with a 2.4GHz SLT radio system from Tactic or other manufacturer. Just look for a radio with an "SLT" logo; that tells you they're 100% compatible with the receivers in all Tx-R aircraft. However, you may already have a favorite transmitter and don't want to give it up. That brings up choice #2: the Tactic AnyLink2. Attach it to your transmitter and it does something amazing: it broadcasts a true 2.4GHz signal that any SLT receiver can pick up. It works with virtually all transmitters, regardless of brand, band or modulation. And it not only costs less than a new radio; it costs less than manyreceivers. For ease, economy, choices and more fun, there's nothing like Tx-R. The 1SQ Tx-R includes: Assembled and finished canopy Factory-installed motors, controller and servos Factory-installed SLT receiver compatible with all SLT transmitters and the AnyLink2 2.4GHz SLT Radio Adapter 3.7V 250mAh LiPo flight battery USB-compatible LiPo charger Extra set of blades Manual Transmitter Functions: Model Select Model Management Trim Settings CH5 and CH6 Assignment Channel Assignments Trainer Function Warnings Servo Reversing (all channels) Sub-Trims (all channels) Travel Limits (all channels) Dual Rates (aileron, elevator, rudder) Exponential (aileron, elevator, rudder) Airplane Functions: Wing Type (normal, V-tail, delta, single aileron, dual aileron, aileron + flap, 2 aileron + flap) Throttle Curve Throttle Cut Aileron Differential Aileron/Flap Adjust Aileron Mixer Elevator Mixer Air Brake Mixer Flap Mixer

[Diamond-Models]

Η www.Diamond-Models.gr διαθέτει πλέον στην Ελληνική αγορά την πλήρη γκάμα προιόντων της STEPCRAFT Γερμανίας. Τα μηχανήματα της STEPCRAFT διαθέτουν εκπληκτική ακρίβεια κατεργασίας καθώς επίσης και υψηλή ποιότητα κατασκευής. Πλήρης κάλυψη απο ανταλλακτικά και αναλώσιμα. Τα CNC μπορούν να κατεργαστουν όλη την γκάμα μοντελιστικων υλικών όπως Balsa,plywoods,carbon,Αλουμίνιο και Ορειχαλκο καθώς επίσης μετατρέπονται ανα πάσα στιγμή εύκολα σε 3D Printer υψηλών επιδόσεων, Thermocut υψηλών επιδόσεων καθώς και κόπτης αυτοκόλητων και φύλλων πλαστικών υλικών. Για περισότερες πληροφορίες είμαστε στην διάθεσή σας http://www.diamond-models.gr/images/gif/stepcraft.gif

[Diamond-Models]

Νέες Παραλαβές Ιούνιος 2014 VELOCITY II plane - Thunder tiger http://www.diamond-models.gr/images/detailed_images/$(KGrHqNHJDcFCimhV7)MBQvw4z3ucw~~60_35.jpg http://www.diamond-models.gr/images/detailed_images/product-26027140257652153999e8986a41.jpg PHOENIX MODEL Sbach .46 - .55 ARF plane Wingspan:1405 mm http://www.diamond-models.gr/images/detailed_images/PH096_Sbach_Chinh14025775225399a272ababa.jpg http://www.diamond-models.gr/images/detailed_images/bf7b9e4c-1662-46ab-b664-675f3dc879f2-PH096-Sbach-16.jpg Technical data - Wingspan: 1405mm (55.3 in) - Length: 1405mm (55.3 in) - Flying weight: 2800-3000 gr - Wing area: 39.4 dm2 - Wing loading: 71g/dm2 - Wing type: Naca airfoils - Covering type: Genuine ORACOVER® - Gear type: Aluminum Hi-grade for main gear and spring wire for tail gear (included) - Spinner size: Plastic 58mm (included) - Radio: 4 channel minimum (not included) - Servo: 5 standard servo: 2 aileron; 1 elevator; 1 rudder; 1 throttle (not included) - Recommended receiver battery: 4.8-6V / 800-1200mAh NiMH (not included)