Σελίδα 24 από 31

Απάντηση: www.Diamond-Models.gr

Δημοσιεύτηκε: Τετ Νοέμ 05, 2014 10:27 pm
από Diamond-Models
ΕικόναΕικόναΕικόναΕικόναSTOL 500 class PnP http://www.diamond-models.gr/images/detailed_images/20140428204589378937.jpg http://www.diamond-models.gr/images/detailed_images/20140428204686898689.jpg http://www.diamond-models.gr/images/detailed_images/20140428204473037303.jpg http://www.diamond-models.gr/images/detailed_images/20140428205655245524.jpg Overview The Art-Tech STOL is part of the next generation of models from this famous brand. Now manufactured with top quality electronics including HobbyWing ESC's you can rely on top performance all the way. The STOL is a unique aircraft and is named after its main purpose Short Take-Off and Landing. This is achieved through advanced aerodynamics and the ability to change the wing section for landing and take-off. It achieves this through a bit of ingenious design, the flaps and leading edge slats are interconnected so as to provide incredible lift at low speeds. Once airborne you can set these back to normal for sports aerobatics and then back again for slow short landings. Features The STOL has been designed as a parachute drop aircraft or toffee bomber to add even more flying fun and pleasure, try some parachute spot landing it's much harder and more fun than you can imagine! 30A Brushless ESC Leading Edge Slats Trailing Edge Flaps Drop Bay for Optional Parachuting Figure Large Tyres for Rough Ground or Grass Powerful Brushless Motor Tough, Coloured EPOFLEXY Construction What's Included This Plug and Play kit contains 7 x 9g servos, 1x Brushless Motor, 1x 30A Brushless ESC and 1x 500 Class STOL Airframe. To make this model flight ready, you will require: 1x 11.1v 1800mAh Li-Po flight battery, 1x 5 (or more) Channel Receiver and Transmitter. Specification Wingspan 1254mm (49.4") Length 988mm (38.9") Weight 1440g (50.8oz) Servos 7 x 9g Recommended Battery 11.1v 1800mAh Li-Po

Απάντηση: www.Diamond-Models.gr

Δημοσιεύτηκε: Τετ Νοέμ 05, 2014 10:31 pm
από Diamond-Models
ΕικόναΕικόναΕικόναΕικόναPC6 Turbo Porter 600 class PnP http://www.diamond-models.gr/images/detailed_images/pc6-header2141513128454593094e36b6.jpg http://www.diamond-models.gr/images/detailed_images/pc6-header1415129347545929039f19c.jpg http://www.diamond-models.gr/images/detailed_images/pc6-header3.jpg http://www.diamond-models.gr/images/detailed_images/pc6-header4.jpg Overview The PC6 is a classic work horse of the sky at many airfields around the world, with its fantastic climb and descent abilities it is perfect for getting skydivers up to height and then back down on to the ground in the shortest possible time. Also very well suited to glider tugging the PC6 is a very versatile aircraft. Art-Tech along with Century UK have developed the 1.7 metre model to imitate the full size aircraft. With ample power you can tow up a 3 metre R/C model glider and with the included tug release system let them go when up to height. It's a bit different but then that's its appeal. Features The model can climb near vertical on full power and also descend vertically with full flaps deployed to a walking speed landing. Never before has such all round performance been available in a sport aircraft of the type. 40A Brushless ESC Trailing Edge Flaps Drop Bay for Optional Parachuting Figure Electronic Tow Hook Wingtip LED Lighting Large Tyres for Rough Ground or Grass Tough EPOFLEXY Construction Specification Wingspan 1700mm (66.9") Length 1252mm (49.3") Weight 1900g (67oz) Servos 1 x 9g, 6 x 17g Recommended Battery 14.8v 3000mAh Li-Po

Απάντηση: www.Diamond-Models.gr

Δημοσιεύτηκε: Τετ Νοέμ 05, 2014 10:35 pm
από Diamond-Models
ΕικόναΕικόναΕικόναΕικόναhttp://www.diamond-models.gr/images/video%20buton.gif
The CX20 Auto Pathfinder is the ultimate in next generation Quadcopter. The model comes fitted with GPS, an electronic compass and altitude sensors and features a GPS hold system. The GPS hold system allows you to fly a position of your choice and then with the flick of a switch the onboard electronics hold the model there. The failsafe and Return To Home functions allow the model to return back to its take-off point on it's own either when you choose, or when the radio signal is lost or interrupted. These systems combined with the super stable flight dynamics make for an incredibly easy to use model that is also a joy to fly. Features Fixed Position Hover Using a combination of a GPS receiver capable of reading from up to 12 satellites at once, an electronic compass to keep its heading locked and altitude sensors to maintain height, flick a switch and the CX20 will hover on the spot. Altitude Hold The CX20 has a unique altitude lock feature, using altitude sensors, in altitude hold mode, it maintains a steady height, allowing you to get those great panning shots without needing to worry about controlling the height. Return To Home At the touch of a button, the CX20 will fly straight along to above the spot it took off from, then gently descend until it touches down at your feet. Perfect for those moments when you've lost orientation or have your hands a little full and need to bring it back safely. This feature also works if you lose radio contact to the model. On sensing that radio signal has been lost, the CX20 will automatically return to the take-off position. Auto Landing Failsafe When your battery starts getting low, the CX20 will automatically begin descending to land in a safe and controlled manner. Intelligent Orientation Control (IOC) Using the onboard electronic compass and GPS sensors, the CX20 has a switchable IOC function. With the IOC function enabled, the model will always fly in the direction you push the controls, which means you donʼt need to worry about which way the model is facing and can concentrate on bringing it back to base or getting that perfect camera shot. Throttle Lock Before any flight, the CX20 automatically locks it's throttle system to prevent accidental start-up and possible damage, allowing you to make any fine adjustments to your camera system (if fitted) without having to worry about getting near those blades. Once everything is set and ready, a small flick of the rudder and everything is live. Don't worry if it's not quite right, as re-locking the throttle is just as easy! GoPro Hero 3 and Hero3+ Compatible Camera Mount (Optional Extra) With the addition of a GoPro Hero3 and Hero3+ compatible camera mount for your CX20 Quadcopter, you can film your flight and get a true birds eye of your flying site. Specifications Rotor Diameter 570mm (22.44") Rotor Blade Length 206mm (8.11") Battery 11.1v 2700mAh Li-Po Length 300mm Width 300mm Height 200mm Approx. Flight Time 10 minutes Number of Channels 8

Απάντηση: www.Diamond-Models.gr

Δημοσιεύτηκε: Τετ Νοέμ 12, 2014 2:57 pm
από Diamond-Models

Απάντηση: www.Diamond-Models.gr

Δημοσιεύτηκε: Τετ Νοέμ 12, 2014 3:01 pm
από Diamond-Models
ΕικόναΕικόναΕικόναΕικόναJ3 Cub EPO span 1400mm PnP by MaxThrust http://www.diamond-models.gr/images/detailed_images/141512995154592b5fb5ee2.jpg http://www.diamond-models.gr/images/detailed_images/~disp615x300-j3%20cub%202%20620.jpg http://www.diamond-models.gr/images/detailed_images/J3_cub_lrg.jpg http://www.diamond-models.gr/images/detailed_images/~disp615x300-j3%20cub%20620137224814751cad853a01e6.jpg With its large 1400mm (55.1“) wingspan, superb flight performance and durable EPOFLEXY construction, this J3 Cub is for the connoisseur! Optimised for use with 4S Li-Po batteries, the powerful brushless motor provides sufficient power for take-offs from the shortest flying strips. Featuring pre-installed servos, factory applied decals with oodles of scale detail and a choice of two authentic colour schemes. Assembled in a few hours, it makes a perfect sport-scale choice for the novice, but will be equally popular with experienced pilots seeking a realistic aircraft thatʼs not too demanding to fly. Whats Included The Plug and Play version of the Cub includes 4 servos (4x 9g), a brushless ESC and a brushless motor all pre-installed. To have this model ready for flight you will need a transmitter and receiver (4 channels or more) a Li-Po flight battery (14.8v 2250mAh) and a compatible charger. Features Decals Pre-Applied Durable EPOFLEXY Construction Powerful Brushless Motor Brushless ESC Scale Detailing Plug and Play This model comes complete just requiring your own transmitter, receiver, battery and charger. Wingspan 1400mm (55.1") Length 950mm (37.4") Weight 1800g (16.6oz) Servos 9g x 4 Recommended Battery 2250mAh 14.8v Li-Po

Απάντηση: www.Diamond-Models.gr

Δημοσιεύτηκε: Τετ Νοέμ 12, 2014 3:02 pm
από Diamond-Models
ΕικόναΕικόναΕικόναΕικόναSTOL 500 class PnP http://www.diamond-models.gr/images/detailed_images/20140428204589378937.jpg http://www.diamond-models.gr/images/detailed_images/20140428204686898689.jpg http://www.diamond-models.gr/images/detailed_images/20140428204473037303.jpg http://www.diamond-models.gr/images/detailed_images/20140428205655245524.jpg Overview The Art-Tech STOL is part of the next generation of models from this famous brand. Now manufactured with top quality electronics including HobbyWing ESC's you can rely on top performance all the way. The STOL is a unique aircraft and is named after its main purpose Short Take-Off and Landing. This is achieved through advanced aerodynamics and the ability to change the wing section for landing and take-off. It achieves this through a bit of ingenious design, the flaps and leading edge slats are interconnected so as to provide incredible lift at low speeds. Once airborne you can set these back to normal for sports aerobatics and then back again for slow short landings. Features The STOL has been designed as a parachute drop aircraft or toffee bomber to add even more flying fun and pleasure, try some parachute spot landing it's much harder and more fun than you can imagine! 30A Brushless ESC Leading Edge Slats Trailing Edge Flaps Drop Bay for Optional Parachuting Figure Large Tyres for Rough Ground or Grass Powerful Brushless Motor Tough, Coloured EPOFLEXY Construction What's Included This Plug and Play kit contains 7 x 9g servos, 1x Brushless Motor, 1x 30A Brushless ESC and 1x 500 Class STOL Airframe. To make this model flight ready, you will require: 1x 11.1v 1800mAh Li-Po flight battery, 1x 5 (or more) Channel Receiver and Transmitter. Specification Wingspan 1254mm (49.4") Length 988mm (38.9") Weight 1440g (50.8oz) Servos 7 x 9g Recommended Battery 11.1v 1800mAh Li-Po

Απάντηση: www.Diamond-Models.gr

Δημοσιεύτηκε: Τετ Νοέμ 12, 2014 3:07 pm
από Diamond-Models
ΕικόναΕικόναΕικόναΕικόναPHOENIX MODEL TUCANO size .61-.91 or 15cc SCALE 1:6 ½ ARF Wingspan:1720mm http://www.diamond-models.gr/images/detailed_images/PH041---Tucano-Chinh14156201505460a6365346f.jpg http://www.diamond-models.gr/images/detailed_images/dfff2eac-b425-47b7-b4d3-43aa3fef63a9-PH041---Tucano-3.jpg http://www.diamond-models.gr/images/detailed_images/83f852f5-703d-400f-8427-96bb61fbb1c2-PH041---Tucano-15.jpg http://www.diamond-models.gr/images/detailed_images/64cf31d5-79e5-4534-b6e3-355aea6a9d92-PH041---Tucano-62.jpg Introducing A great airplane! Its Semi symmetrical airfoil and long tail moment deliver precise aerobatic performance for experienced pilots, yet the Tucano's superb stability and ultralight wing loading make it an ideal first low–wing model. This ARF has been designed to keep building time to a minimum; it's 90% pre-built, with premium covering. The better you get the more fun it gives you! Technical data - Wingspan: 1730mm (68.1in) - Length: 1450mm (57.1 in) - Flying weight: 4.2 - 4.8 kg - Wing area: 46.6 dm2 - Wing loading: 80g/dm2 - Wing type: Naca airfoils - Covering type: Genuine ORACOVER® - Retract gear type: Air-retract With CNC Suspension Metal Struts (included) - Spinner size: Plastic 70mm (included) - Radio: 6 channel minimum (not included) - Servo: 7 standard servo: 2 aileron; 1 elevator; 1 rudder; 1 steering nose; 1 retract; 1 throttle (not included) - Recommended receiver battery: 4,8-6.0V 1200-2000mAh NiMH (not included) - Servo mount: 21mm x 42 mm - Propeller: suit with your engine - Engine: .61-.91 / 2-stroke or .91 / 4 stroke glow engine (not included) - Motor: brushless outrunner 1800-2000 W, 500 KV (not included) - Gravity CG: 100 mm (7 in) Back from the leading edge of the wing, at the fuselage - Control throw Ailerons: Low: 8mm up/down, 10% expo; High: 10mm up/down, 10% expo - Control throw Elevators: Low: 8mm up/down, 12% expo; High: 10mm up/down, 12% expo - Control throw Rudder: Low: 30mm right/left, 15% expo; High: 40mm right/left, 15% expo - Experience level: Intermediate RECOMMENDED MOTOR AND BATTERY SET UP - Motor: Rimfire.60 (not included) - Propeller: 15x6- 15x8 E APC (not included) - Lipo cell: 6 cells / 4000 – 5500mAh (not included) - Esc: 60-100A (not included) Feature - Designed for compatibility with both GP and EP flight - Covered in genuine ORACOVER® - Top quality balsa/light plywood construction - Air-retract With CNC Suspension Metal Struts included - Full-depth cockpit and instrument panel and pilot included - Scale plastic rocket included - Bolt-on two-piece wing for easy transport and setup at the field - Removable canopy for easy change lipo battery and set up radio - Strong Light Weight Construction - Superb flying characteristics, plus an accurate scale outline - High-quality hardware package included Colour chart • Light green (# 21042) • Blue (# 21050) • Cub Yellow (# 21030) • White (# 21010) • Black (# 21071)

Απάντηση: www.Diamond-Models.gr

Δημοσιεύτηκε: Τετ Νοέμ 12, 2014 3:11 pm
από Diamond-Models

Απάντηση: www.Diamond-Models.gr

Δημοσιεύτηκε: Τετ Νοέμ 12, 2014 3:13 pm
από Diamond-Models

Απάντηση: www.Diamond-Models.gr

Δημοσιεύτηκε: Παρ Νοέμ 28, 2014 6:55 pm
από Diamond-Models
ΕικόναΕικόναΕικόνα(img width=735 height=930)Jamara Servo AQUA7 MG http://www.diamond-models.gr/images/detailed_images/39920_1.jpg http://www.diamond-models.gr/images/detailed_images/39920_2.jpg Operating Temperature 0 ~ 60 Operating voltage 5 - 6 V Operating time (5 V) 0.14 sec. / 60 ° Operating time (6 V) 0.12 sec. / 60 ° Force in kg (5 V) 6 Force in kg (6 V) 7 Dimensions in mm 40.5 x 20 x 39.3 Weight in g 54.7 Our proven Q7-purpose servo is now also available with ball-bearing full metal gearbox in a waterproof version. In addition to the fast response time of 0.12 sec and a force of 7 kg, it also has 3 rubber seals in the ground, cover and splined shaft. And all this at a weight of only 54 grams. ECO Power Box 8-16 incl. Main Switch (5 - 12V systeem) http://www.diamond-models.gr/images/detailed_images/rccskj8-16-basic-power-box-no-killswitch.jpg http://shop.rccskj.com/pic/UserFiles/20121130202740924786.jpg Power distribution system including power switch. 8 receiver channels in and 16 servo channels out. Optimized for use with LiFe (A123) and LiPo batteries. See LiFe (A123) 2600mAh 6.6V battery. Also suitable for LiPo with an additional BEC. Note: Receiver voltage is equal to battery voltage Specification: 8 Inputs (A,B,C,D,E,F,G,H) 16 Buffered/Filtered and amplified outputs (A,A,B,B,C,C,D,D,E,E,F,F,G,G,H,H) Including overall power switch. Robust design, the receiver and servo's will be power with a malfunction of the power switch. Optimized for use with 2 cell LiFe (A123) and 2S LiPo battery. Can be used without a BEC. Can be used with 4/5 cell NiCd or NiMh battery Optimized for 6V and HV servos No seperate Radio battery needed Mounting receiver at the middle of the power box Dual Battery Inputs - Auto Load sharing and Failsafe switch over between batteries Includes rubber grommets , Deans connectors and screws 30Amp power bus Deans Input Connections Includes 8 leads for connection to receiver, additional leads can be purchased seperately Works with PPM , PCM, 2.4Ghz systems Suitable for both analog as well as digital servos 5 volt Minimum input is required (preferred regulated) - 12.6 Volt Max Input

Απάντηση: www.Diamond-Models.gr

Δημοσιεύτηκε: Παρ Νοέμ 28, 2014 6:59 pm
από Diamond-Models

Απάντηση: www.Diamond-Models.gr

Δημοσιεύτηκε: Κυρ Δεκ 07, 2014 11:26 am
από Diamond-Models
ΕικόναΕικόναΕικόναΕικόναDLE55RA gas engine with rear exhaust (55cc, 5.5hp, 1570gr) http://www.diamond-models.gr/images/detailed_images/dle55ra-frontside.jpg http://www.diamond-models.gr/images/detailed_images/dle55ra-overview.jpg DLE 50cc takes performance to a new level with the rear exhaust DLE-55RA. Everything about this engine screams performance from the piston skirt - designed to be lightweight for quick throttle response and tons of power - to the rear exhaust That lets you easily install a tuned pipe in your aircraft. The 55RA biedt 100 rpm more than the standard DLE-55. It includes engines standoffs, electronic ignition, spark plug and Pitts style muffler. Technical Specification: Cylinder Capacity 55.6 ccm Power 5.5 hp 4.0 kW RPM 1350 - 8500 r / min Propeller 22x8 - 23x10 inches Electronic ignition voltage 4.8 to 8.4 volts Fuel ratio 30: 1 petrol: oil weight: Engine 1330 grams Exhaust 90 gram Inflammation 145 grams documentation: User Manual User Manual DLE55RA NGH GF38 4-stroke gas engine (38cc, 3.6hp, 1310gr) http://www.diamond-models.gr/images/detailed_images/img_0980.jpg http://www.diamond-models.gr/images/detailed_images/img_0973.jpg Technical Specification: Displacement (Cylinder Inhoud) 38 ccm Output Power 3.6hp/ 2.7 kW Carburetor Walbro WT1022 Speed Range 1800 - 8300 rpm Propeller 18x8-10 - 20x8 inch Ignition power supply 4.8 - 6 Volt Spinner bout diameter 9.5 mm Gas/Oil mix ratio (Brandstof verhouding) 35 : 1 gas : oil Weight: Engine 1295 gram Muffler 15 gram Ignition 120 gram Documentation: User Manual NGH GF38 User Manual Afstellen Ontsteking Walbro Manual Wallbro WT Series Manual

Απάντηση: www.Diamond-Models.gr

Δημοσιεύτηκε: Κυρ Δεκ 07, 2014 11:31 am
από Diamond-Models

Απάντηση: www.Diamond-Models.gr

Δημοσιεύτηκε: Κυρ Δεκ 07, 2014 11:45 am
από Diamond-Models

Απάντηση: www.Diamond-Models.gr

Δημοσιεύτηκε: Τρί Δεκ 09, 2014 8:36 pm
από Diamond-Models