www.Diamond-Models.gr

[Diamond-Models]

YUKI MODEL C-400 Cornelius PNP wing:1450mm http://www.diamond-models.gr/images/detailed_images/C-400-Cornelius-PNP-1-450mm-174070_b_0.jpg http://www.diamond-models.gr/images/detailed_images/C-400-Cornelius-PNP-1-450mm-174070_b_1.jpg http://www.diamond-models.gr/images/detailed_images/C-400-Cornelius-PNP-1-450mm-174070_b_2.jpg Technical specifications Scale: 1: 7.5 Wingspan: 1.450 mm Length: 990 mm Weight: 950 g Material: EPO Profile: E 195 Servos: 4 x 9 g Engine: BRUSHLESS Controller HW Skywalker 40A features Elevator: yes Rudder: yes Aileron: yes Flaps: yes Motor: yes Nosewheel: yes Navigation lights: yes Landing lights yes delivery Hull: decorated Wing: decorated Tail: decorated Drive: installed Servos: installed Chassis: yes Lighting: installed Operating instructions German, English Recommended accessories (not included) Remote control system: 5 Channel Battery: LiPo 3s1p (11.1 V), from 1800 to 2800 mAh

[Diamond-Models]

UDI U27 Free Loop Inverter http://www.diamond-models.gr/images/detailed_images/A-U27_a1448892969565c5a293c04b.jpg http://www.diamond-models.gr/images/detailed_images/A-U27_b.jpg http://www.diamond-models.gr/images/detailed_images/A-U27_e.jpg http://www.diamond-models.gr/images/detailed_images/A-U27_c.jpg The UDI U27 Free Loop is an 'Inverter' style quadcopter, featuring intelligent electronics to take quadcopter aerobatics to the next level. Many quadcopters can flip 360° back to upright flight but the new U27 is capable of flipping 180° to inverted (upside down) and continuing to fly! When flipped controls are automatically reversed allowing you to fly as easily as if the quad was upright! During the flip the motors reverse direction in a fraction of a second to suit inverted flight. You don't have to flip to fly inverted, you can (with care) launch the U27 inverted or take off inverted from the floor, a feature that is especially useful if you crash and the quad flips upside down. As you would expect from UDI it has 6-axis stabilisation and comes prebuilt in the box, all you need to do is add 4 'AAA' batteries to the Tx and charge the Li-Po using the included charger. The 'console' style 2.4GHz controller is easy to hold and the flip function is as easy as pressing a button. • 180° flip function to inverted! • Automatic orientation sensing • 2.4GHz Radio Included • No Assembly Required! • LED Lights • Six-Axis Gyro Required for use: 4 x 'AAA' batteries for controller Specification Length: 139mm (5.47") Width: 139mm (5.47") Height: 35mm (1.37") Weight: 55g Radio System: 2.4GHz (Inc.) Electric Motor: 4 x Brushed (Inc.) LiPo: 1S 3.7V 450mAh (Inc.) Charger: USB (Inc.) Rotor Diameter: 56mm (2.2")

[Diamond-Models]

Ευχόμαστε Ολόψυχα σε Όλους
Υγεία Χαρά και Ευτυχία
Καλά Χριστούγεννα !!!

[Diamond-Models]

Νέα Παραλαβή 14-1-2016 Viper Jet Wingspann:2,25mt http://www.diamond-models.gr/images/detailed_images/20160114_173540.jpg https://scontent-cdg2-1.xx.fbcdn.net/hphotos-xfl1/v/t1.0-9/12512706_1713774542193525_5215126581851145796_n.jpg?oh=9f5adbbb69281819792cf9a046e9696f&oe=573DCA91 https://scontent-cdg2-1.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/12510252_1713774655526847_3935889403316432121_n.jpg?oh=327aea652a9e0c2330763a8d559ad4f3&oe=570559BE https://scontent-cdg2-1.xx.fbcdn.net/hphotos-xpl1/v/t1.0-9/12507561_1713774525526860_8446197565912020657_n.jpg?oh=d3cf207152f81977819b6e28c162f47f&oe=57021CA5

[Diamond-Models]

Νέες Παραλαβές Ιανουαρίου 2016 https://scontent-mxp1-1.xx.fbcdn.net/hphotos-xlt1/v/t1.0-9/12572993_1714990782071901_5197150978355602189_n.jpg?oh=e5bb3af93bc2f115b2f164069ced7a56&oe=573939C8

[Diamond-Models]

Νέες Παραλαβές 16 Φεβρουαρίου 2016 https://scontent-mxp1-1.xx.fbcdn.net/hphotos-xtp1/v/t1.0-0/s526x395/12734275_1725193441051635_8899790287334851112_n.jpg?oh=3803377873db5904e3e704d68a88e1ee&oe=572D838A

[Diamond-Models]

Νέες Παραλαβές Φεβρουαρίου 2016 Black Horse P-47D Thunderbolt 33-45cc ARTF Incl. retract set http://www.diamond-models.gr/images/detailed_images/photo3g.jpg http://www.diamond-models.gr/images/detailed_images/a-bh117145614540656cb03fe7298e.jpg http://www.diamond-models.gr/images/detailed_images/12769622_10207995172373562_1196468758_n.jpg http://www.diamond-models.gr/images/detailed_images/2934_821_2.jpg The P-47D Thunderbolt is one of those aircraft that has stood the test of time. It has been modelled on countless occasions, but when Black Horse decided to make a big one for 30cc petrol engines they went all-out for realism and presence in the air. The real Thunderbolt was a very rugged machine that often returned from combat with large lumps missing, even engine cylinders! The Black Horse version will not quite achieve that, but she certainly is tough! Strength where it is needed and weight saving where it is not, that is how Black Horse designs their models. From the very beginning, the CAD design is optimised to provide the correct combination of toughness and low wing loading. Low wing loading means no nasty surprises at slow speed and less wear and tear on the undercarriage. The supplied undercarriage is the very latest generation of Black Horse air type with CNC machined mechanics and tough oleo legs. The undercarriage has been refined and improved throughout all Black Horse production to culminate in this new generation system. The CNC cut balsa and ply parts have been jig assembled in the factory to assure complete alignment during your assembly. All wood parts are covered in durable Oracover film and finished off using authentic decals for both a dramatic and practical colour scheme. The 30cc Thunderbolt makes a great choice for scale modellers that want something practical and just can't be bothered to spend a year building it. Why would you want to when Black Horse does it so well out of the box for such a great price? • Air retracts included • Covered with high-quality covering film • Factory painted fibreglass cowl • Functional flaps • Hand-painted pilot Specification Wingspan: 2100mm (82.67") Length: 1875mm (73.81") Weight: 7500g (16.53lb) Servos: 9 (Req.) Radio System: 6 Channel (Req.) Petrol Engine: 30- 35cc (Req.)

[Diamond-Models]

Ripmax Quartz QZ508 Servo - Digital Coreless HV (0.10sec/20.32kg) http://www.diamond-models.gr/images/detailed_images/P-QZ508.jpg This high quality, high performance servo is intended to appeal to discerning modellers that only want the best. It's plastic case, ball-race, coated metal gears, regular motor and digital amplifier provides the perfect solution to your servo needs. If torque with a core-less motor is what you need, this is the servo for you! Check through the specifications and performance and we are sure you will agree! The case centre is CNC machined from solid Aluminium for the very best in strength and rigidity. The Main Case is made from plastic to provide you this servo without the high price tag. Specification Case Centre: Aluminium Main Case: Plastic Operating Frequency: 1520΅s/330hz Water Resistant: No Weight: 59.3g Electric Motor: Coreless Gear Type: Aluminium w/TiCn + brass Dimensions: 40.5 x 20.2 x 36.5mm Speed: 0.12 sec @ 6.0v Speed: 0.10 sec @ 8.4v Torque: 17.25 kg/cm @ 6.0v Torque: 20.32 kg/cm @ 8.4v Voltage: 6.0 - 8.4v Bearings: Twin BB

[Diamond-Models]

Νέες Παραλαβές Φεβρουαρίου Συνοπτικά https://scontent-cdg2-1.xx.fbcdn.net/hphotos-xlf1/v/t1.0-9/10458461_1727453987492247_1623100569706392405_n.jpg?oh=4bd3b997b5141da9fd4028606883f6e4&oe=5725F8B1 https://scontent-cdg2-1.xx.fbcdn.net/hphotos-xlf1/v/t1.0-9/12742713_1727454007492245_8484391997163348590_n.jpg?oh=d443a3db21d4c84d53cf27db8a2b828f&oe=576CDDD0 https://scontent-cdg2-1.xx.fbcdn.net/hphotos-xtl1/v/t1.0-9/12718352_1727453974158915_798307386413776160_n.jpg?oh=50545ba80af04130fdce8f018ab554ce&oe=575317D2 https://scontent-cdg2-1.xx.fbcdn.net/hphotos-xla1/v/t1.0-9/10444761_1727454000825579_4888152079034281036_n.jpg?oh=b8d8738468b89890f0c1d85bb6f63f35&oe=575600CB

[Diamond-Models]

Νέα Παραλαβή Φεβρουαρίου απο GRAUPNER Graupner SEA FURY 900mm PnP http://www.diamond-models.gr/images/detailed_images/00025814_w145624653856cc8f0a9f8c2.jpg https://scontent-mxp1-1.xx.fbcdn.net/hphotos-xtp1/v/t1.0-9/12745634_1727626744141638_7460737336253209442_n.jpg?oh=cdb72403277a693a05ce0587c594b70a&oe=576FAB58 https://scontent-mxp1-1.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/12745535_1727626787474967_2644434052376033205_n.jpg?oh=a53c19838f9b41936abb35a98d03f5d2&oe=57635059 https://scontent-mxp1-1.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/12734125_1727626800808299_1259515696941381983_n.jpg?oh=8fa9d578faf33ae1bb49509201bd4e4a&oe=576022E0 Description Wings, fuselage, and tailplane pre-covered with foil 6 DES 476BB servos installed with rudder linkages COMPACT 345 Z 7.4V brushless motor fully installed GR-16 HoTT receiver installed Graupner 2/1600 7.4V LiPo battery included GRP engine bonnet pre-painted Deep drawn cockpit canopy with pilot figure already painted Soft rubber wheels for main undercarriage and tailwheel Comprehensive operating instructions in German, English, and French Order no. 9351.HOTT Realistic semi-scale RFH model Outstanding flight performance Comes standard with landing flaps Cockpit can be removed for easy access for LiPo battery Two-piece aerofoil RC functions Rudder Elevator Aileron Landing flaps Motor speed Specification Wing area : 15 dm² All-up weight, approx.: 870 g Total surface area, approx. : 18 dm² Tailplane area : 3 dm² Overall length, approx.: 820 mm Wingspan approx.: 900 mm Wing loading : 48 g/dm²

[Diamond-Models]

GRAUPNER WP STARLET 900 wingspan 900 mm PnP http://www.diamond-models.gr/images/detailed_images/9353_Starlet_900_011_1391970879.jpg https://scontent-mxp1-1.xx.fbcdn.net/hphotos-xfl1/v/t1.0-9/10367810_1727626824141630_746945762723537496_n.jpg?oh=4faa5ad0c495576e55e77bc875e65d53&oe=572404D7 https://scontent-mxp1-1.xx.fbcdn.net/hphotos-xlt1/v/t1.0-9/12743679_1727626877474958_3869931360378758508_n.jpg?oh=9c494deb7647f1d1f80abf575eace688&oe=5769B118 https://scontent-mxp1-1.xx.fbcdn.net/hphotos-xlp1/v/t1.0-9/12734011_1727626900808289_8784513808527145550_n.jpg?oh=0de6d063ea0f70d0cae50668f247dec5&oe=576A32C2 Wings, fuselage, and tailplane pre-covered with foil 4 DES 417 BB servos installed with rudder linkages COMPACT 260Z 7.4V brushless motor fully installed GR-12 HoTT receiver installed Graupner 3/650 11.1V LiPo battery included GRP engine bonnet pre-painted Deep drawn windshield with painted pilot figure Soft rubber wheels for main undercarriage and tailwheel Comprehensive operating instructions in German, English, and French Order no. 9353.HOTT Realistic semi-scale RFH model Outstanding flight performance Tail-dragger undercarriage with wheel covers Cockpit can be removed for easy access for LiPo battery Two-piece aerofoil Specification Overall length, approx. 600 mm Artikelnummer 9353.HOTT Wing area 11,2 dm² Total surface area, approx. 13,5 dm² All-up weight, approx. 500 g Tailplane area 2,3 dm² Wingspan approx. 900 mm WarengruppenNr 154 RC functions Rudder Elevator Aileron Motor speed

[Diamond-Models]

Νέα Παραλαβή Yuki Model Team Bonhomme Edge 540 ARF 1.700mm for 20cc - 26cc https://scontent-cdg2-1.xx.fbcdn.net/hphotos-xlf1/v/t1.0-9/12814454_1732150827022563_4195859964412172514_n.jpg?oh=0ee467d407acd469dc7456c4d425534d&oe=5793D5E0 https://scontent-cdg2-1.xx.fbcdn.net/hphotos-xpt1/v/t1.0-9/12832329_1732150847022561_3530652324252912579_n.jpg?oh=4b5b38bbba03a641265f8705c20c5c84&oe=5756F123 https://scontent-cdg2-1.xx.fbcdn.net/hphotos-xpt1/v/t1.0-9/12718240_1732150860355893_1226553997191850503_n.jpg?oh=b55e66726f9a99934868a3f083a26d2b&oe=575F3C40 https://scontent-cdg2-1.xx.fbcdn.net/hphotos-xlp1/v/t1.0-9/12801217_1732150873689225_2309872473063108442_n.jpg?oh=ba75d7d6e83c63b45dd3ae1dc091d2a6&oe=57586785 Technical data Scale: 1: 4.4 engine required: 1.20 2T Glow or 20cc-26cc etrol engine wingspan:1,700 mm Material:Wood covering:ORACOVER Functions Elevator:Yes Rudder:Yes ailerons:Yes Motor:Yes Tail wheel:Yes Scope of delivery Fuselage:ready covered Wing:ready covered empennage:ready covered Landing gear:Yes Spinner:Yes Racing Pilot:Yes pre-installed Instruction manual:German, English

[Diamond-Models]

https://scontent-cdg2-1.xx.fbcdn.net/hphotos-xtf1/v/t1.0-9/12814416_1732150890355890_3312132944498568758_n.jpg?oh=9edef6d3a6b48e189d6d7a3d136d46da&oe=57556843 https://scontent-cdg2-1.xx.fbcdn.net/hphotos-xtf1/v/t1.0-9/12801331_1732150803689232_4185129593691592259_n.jpg?oh=4e7b36d0c12ddc365ac7d910b0f525b5&oe=5762CC2B https://scontent-cdg2-1.xx.fbcdn.net/hphotos-xtp1/v/t1.0-9/12804631_1732150687022577_8410332905313798994_n.jpg?oh=26f02b34cedbd6ef4e4aea08dc36f46d&oe=574E945F https://scontent-cdg2-1.xx.fbcdn.net/hphotos-xlp1/v/t1.0-9/12718075_1732150673689245_1474906476031299551_n.jpg?oh=3aefe7939c746d49513c3dd7c6aa06ee&oe=575A6E1D

[Diamond-Models]

Νέα Παραλαβή σε Μπαταρίες -Καλώδια -Βύσματα και Αξεσουάρ https://scontent-mxp1-1.xx.fbcdn.net/hphotos-xlt1/v/t1.0-9/12814256_1733534790217500_5963117070958561005_n.jpg?oh=dbf615b7bd05613559415b2b1459f5b0&oe=5752E9EB https://scontent-mxp1-1.xx.fbcdn.net/hphotos-xlt1/v/t1.0-9/12814085_1733534806884165_303636571853301262_n.jpg?oh=4b3afd9ec5c4d7627cdc504b60d54b41&oe=575C783A https://scontent-mxp1-1.xx.fbcdn.net/hphotos-xft1/v/t1.0-9/12795309_1733534780217501_795302872424570783_n.jpg?oh=a3cc59939243e5bdb36f58939ff02d92&oe=578F42A2 https://scontent-mxp1-1.xx.fbcdn.net/hphotos-xlt1/v/t1.0-9/12803207_1733534770217502_903352710814920179_n.jpg?oh=2f3bf5b45da5aee9586d46a66f1e39df&oe=57904B13

[Diamond-Models]

Νέες Παραλαβές 16-Μαρτίου 2016 ST Model Acrobat EP wingspan:1230mm PnP upgraded for 4s lipo https://scontent-cdg2-1.xx.fbcdn.net/hphotos-xat1/v/t1.0-9/12814225_1735406910030288_2148943073501951798_n.jpg?oh=894afb0ca243f8cbbc7ade234c67ba7a&oe=574A68A7 https://scontent-cdg2-1.xx.fbcdn.net/hphotos-xpl1/v/t1.0-9/229083_1735406940030285_919510288243471636_n.jpg?oh=201adedbf14542154510c444311b5b97&oe=574E8EBF https://scontent-cdg2-1.xx.fbcdn.net/hphotos-xft1/v/t1.0-9/10399739_1735406953363617_2152208172082058595_n.jpg?oh=6a9e317738d1b737e4b84c1c9ace83e6&oe=575598A3 https://scontent-cdg2-1.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/1935544_1735406973363615_1170903671963968121_n.jpg?oh=d5f4ba7f43ca8aa596260880c19bcf31&oe=5751A550 Just one look at the massive control surfaces and you can see that the new ST Model Acrobat is capable of serious 3D performance. And it doesn't disappoint! Knife edge loops, stable harriers and waterfalls are well within the model's capability. This is a model that will encourage you to push yourself to the limit. Supplied with a powerful brushless motor and 50A ESC together with pre-installed 17g servos. All you need is your choice of transmitter and receiver plus a suitable 4S 2200mAh Li-Po and charger. ST Models tough EPO construction ensures that this is a model that will last many seasons. • Fully 3D capable design • Removable side force generators • Extreme 4S brushless power • Easy glue free assembly • EPO foam construction Specification Wingspan: 1,230mm (48.5") Length: 1,333mm (52.5") Weight: 1.44Kg (50.8oz) Servos: 4 x 17g Mini (Inc.) Radio System: 4-5 Channel (Req.) Electric Motor: Brushless Outrunner (Inc.) LiPo: 4S 14.8v 2200mAh (Rec.) Speed Controller: 50A (Inc.)