www.Diamond-Models.gr

[Diamond-Models]

Graupner WP Hott Deluxe PnP http://www.diamond-models.gr/images/detailed_images/9932.100_HoTT_Deluxe_001%5BWeb%20quality%5D.jpg http://www.diamond-models.gr/images/detailed_images/9932.100_HoTT_DEluxe_003%5BWeb%20quality%5D.jpg http://www.diamond-models.gr/images/detailed_images/9932.100_HoTT_DEluxe_005_1%5BWeb%20quality%5D.jpg Specification Wing area : 21,0 dm² All-up weight, approx.: 1000 g Total surface area, approx. : 25,0 dm² Tailplane area : 4,0 dm² Overall length, approx.: 955 mm Wingspan approx.: 1240 mm Wing loading : 40,0 g/dm²

[Diamond-Models]

Νέα Παραλαβή Σεπτεμβρίου σε HiFei Speed controlers απο www.Diamond-Models.gr http://www.diamond-models.gr/images/detailed_images/2175.jpg Hifei Swordfish ProII 240A HV 12s water proof http://www.diamond-models.gr/images/detailed_images/201307231518407559.jpg Hifei ESC 160A-GII-12S http://www.diamond-models.gr/images/detailed_images/201301091402356550.jpg Hifei ESC 180A-GII-6S καθώς επίσης και την πλήρη σειρά από HiFei ESC και Hifei Capacitor Banks

[Diamond-Models]

Νέα Παραλαβή Roban UH60 700 class 4 blade heads+Mechanics http://www.diamond-models.gr/images/detailed_images/Compactor_700-Scale_Sikorsky_HH-60_Jayhack_01_720.jpg http://www.diamond-models.gr/images/detailed_images/151412178519542c2257bd596.jpg https://encrypted-tbn1.gstatic.com/images?q=tbn:ANd9GcRDhi7m6-5T_XXqs2-DtP1gJfmzpTUsM-oHqRVDK7NoWjVChEjrLQ https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcRE50h_leT9dwGaJU6Nv6ePSfPTOo7eY55TIV7OhWnJR9baQUBw https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcTXYUttT08gQwmIbcGMf4o7e0ZQ1SFUrLI9eHNqru-HzehYT6YiMQ Body length: 1700mm Length incl. rotors: 1850mm Width: 665mm Height: 445mm Main rotor diameter 1560mm Main blade length: 750mm Tail rotor diameter: 280mm Tail blade length: 45mm Main shaft diameter: 12mm Tail shaft diameter: 5mm Spindle diameter: 8mm Main blade count: 4 Tail blade count: 4 Drive gear ratio: 1:13.8:4.7 Motor:* 1x 750MX 450KV brushless outrunner , 12S capable Speed controller:* 1x 120A brushless, 12S capable Servo:* 3x metal gear cyclic, 1x metal gear tail servo Battery:* 44.4V 5000mAh 35C Flight time: 5 minutes Takeoff weight: 8000g Flight Stabilization:* 3 axis flybarless gyro Radio Control:* min. 6 channel with pitch and throttle curves This scale helicopter comes with a complete scale mechanic! Only electronic components are needed! 12S 5000mAh Lipo battery, 30C + 700 size standard cyclic and tail metal geared servos, not HV equipment needed Align 750MX 450KV Motor HML75M02 (or same size and KV class, no lower KV recommended, main shaft needs to be equally long!) 3 Axis Gyro suitable for scale helicopters (e.g. Skookum 720, Bavarian Demon X) 7 channel RC system (electric retract system is included and requires aux channel for control) 120A HV ESC (govenor recommended but not necessary) Description: Robans new 700 size UH-60 is now available. Itʽs the sixth product in our Super Scale series. Our new True Scale Design locates the cockpit exactly at the right spot, unlike on most canopies based on 3D mechanics. The compact mechanic is built into the engine compartment, just like on a real helicopter. Therefore it allows space for front to back scale cockpit seats. The position light system programmable with 9 different patterns is preinstalled. The fuselage of the UH-60 stands out through the detailed crafted surface details and the overall correctly scaled down shape. This unique scale look and details stun and make it hard to see the difference to a real helicopter. The helicopter comes with a detailed instruction manual. The setup is simple and quick, the mechanics are completely preassembled. Only screw drivers and allen keys are required to make it airborne. Features: • Quad Blade Rotorhead and scale carbon fiber rotor blades included • Quat Tail Blade and scale carbon fiber tail blades included • Extremely detailed surface details, a realism unknown in this size class • Complete seven seated scale cockpit • Complete built in / preinstalled position lighting system (controllable via aux channel) • Special CCPM mechanics built in the top section, as on a real helicopter • Use of 750MX standard equipment (12S battery, 450KV motor), fly with your existing parts • Take off weight of 9kg (about the double than a 700 3D helicopter) • 1700mm long, exact 1/ scale • Product comes preassembled and requires very few work to mobilize it

[Diamond-Models]

Νέα Παραλαβή Οκτομβρίου Black Horse L-39 Albatros 90mm EDF ARTF http://www.diamond-models.gr/images/detailed_images/BH1411140689924653db942e9f645.jpg http://www.diamond-models.gr/images/detailed_images/BH141-113999646845371c40ce2b43.jpg http://www.diamond-models.gr/images/detailed_images/BH141-6.jpg http://www.diamond-models.gr/images/detailed_images/2014-05-12%2016.43.33.jpg The L-39 is the most widely used jet trainer in the world and has served with over 30 air forces. In addition to performing basic and advanced pilot training, it has also flown combat missions in a light-attack role. Black Horse has managed to faithfully recreate this iconic jet using the clever lightweight CNC construction techniques they have become well known for. The fuselage features a hinged opening canopy and removable cockpit interior allowing a large access hatch for easy battery access. Black Horse paid extra attention to this cockpit on this model and used hand painted vac-form components to reproduce a very detailed cockpit area. The wing and tailplane halves plug in to the fuselage on an aluminium spar and are removable for easy transportation. Supplied complete with mechanical retract units and tough CNC machined oleo legs. The sprung oleos help with ground handling and she copes well with grass surfaces. The L-39 is designed to suit higher end 90mm electric ducted fan units and 8S battery setups. A good example would be a Wemotec 90mm Midi Fan Evo, HET 650-68-1500 motor, 120A HV ESC and a 8S 29.6v 6,000mAh Li-Po. It would also suit turbine conversions (no turbine information is supplied). • Mechanical retracts, oleos and wheels included • Detailed cockpit and pilot • Balsa/Ply construction using advanced CNC techniques • Covered with high quality Oracover film Specification Wingspan: 1,450mm Length: 1,860mm Weight: 4.3 - 4.6 kg Servos: 8 (+3 Retract) (Req.) Radio System: 8 Channel (Req.) Electric Motor: from 1000kv-2000kv (Req.) EDF Fan Diameter: 90mm (Req.) Speed Controller: 85-HV--120A-6s (Rec.) LiPo: 6s-10S 5,000-6,000mAh (Req.)

[Diamond-Models]

Saturn X6 6 Channel Combo 2.4GHz FHSS http://www.diamond-models.gr/images/detailed_images/P-SATRAD6A.jpg http://www.diamond-models.gr/images/detailed_images/P-SATRAD6A_b.jpg http://www.diamond-models.gr/images/detailed_images/P-SATRAD6A_d.jpg http://www.diamond-models.gr/images/detailed_images/P-SATRAD6A_c.jpg A revised version of the 6 channel high performance Saturn 2.4GHz radio system at an incredibly low price! Perfect for receiver-ready models as it is supplied without servos. A new full-range, even smaller six channel receiver is supplied as standard. Interference-Free 2.4GHz Technology 4 Channel Digital Proportional Radio with two extra switched channels. Servo Reversing on main channels Battery Condition LEDs Lightweight 6 Channel Receiver Included! Specification Modulation: Saturn X 2.4GHz Channels: 6

[Diamond-Models]

JOYSWAY electric "BULLET" model RTR http://www.diamond-models.gr/images/detailed_images/B-JS-830114126055015432a63dd2a04.jpg http://www.diamond-models.gr/images/detailed_images/B-JS-8301_b.jpg http://www.diamond-models.gr/images/detailed_images/B-JS-8301_e.jpg http://www.diamond-models.gr/images/detailed_images/8301%20BULLET_114002412505375fc625deae.png Shooting across the water, the new Bullet Speedboat will certainly leave its mark. Supplied with 2.4GHz radio gear, a 30A water-cooled brushless ESC w/ BEC mated to a powerful 2815 out-runner brushless motor, tough 37g steering servo and CNC aluminium rudder, it just requires an 11.1V 2200mAh 20C LiPo pack, balance charger plus 8 'AA' batteries for the transmitter to complete. Specification Hull Material: One Piece Blow Moulded Length: 729mm (28.7") Weight: 1.25kg (2.75lb) Servos: 1x 37g (Inc.) Radio System: 3 Channel 2.4GHz (Inc.) Electric Motor: Water Cooled 2815 Outrunner (Inc.) Speed Controller: 30A Water Coolled (Inc.) LiPo: 11.1v 2200mAh 20C (Req.) Beam: 180mm (7.1")

[Diamond-Models]

Zenoah G450PU Air και Zenoah G380PU Air

http://www.diamond-models.gr/images/detailed_images/G380PU.jpg

http://www.diamond-models.gr/images/detailed_images/G450PU.jpg

[Diamond-Models]

Νέες Παραλαβές σε Μπαταρίες http://www.diamond-models.gr/images/detailed_images/batteries.tile.jpg http://www.diamond-models.gr/images/detailed_images/O-VB6N3000SCLT.jpg Ripmax 6.0v 2500mAh Eneloop Rx Pack Hump Ripmax Vanquish 7.2v 3000mAh Ni-MH Battery with Tamiya Connector Hi-Energy 6.0v 1600mAh "A" Ni-MH Rx Pk Flat Hi-Energy 4.8V 2200mAh Ni-MH Rx Pk Square Hi-Energy 6.0v 2200mAh Ni-MH Rx Pk Flat Intellect 2S 240mAh 25C Li-Po UDI U9/10/21 Battery Ripmax Li-Po Battery 3.7v 1100mah

[Diamond-Models]

Νέες Παραλαβές Οκτώβριος 2014 PHOENIX MODEL Giant VOLCANO 60CC SCALE 1:4 1/4 ARF http://www.diamond-models.gr/images/detailed_images/PH115_VOLCANO_Chinh.jpg http://www.diamond-models.gr/images/detailed_images/5f78edde-381e-4881-a65d-1d0f1a8f8ece-PH115-VOLCANO-3.jpg http://www.diamond-models.gr/images/detailed_images/ef3087a8-b8c6-4784-8256-8cf1f8b175d7-PH115-VOLCANO-23.jpg http://www.diamond-models.gr/images/detailed_images/fce43680-ae88-4331-86a9-d74c1990d407-PH115-VOLCANO-25.jpg http://www.diamond-models.gr/images/detailed_images/PH115-VOLCANO-30.jpg Introducing A real beauty aircraft. Anyone who likes the war birds is bound to love this airplane. It has a large wing and very strong construction. Control surface size and the right tail moment promise great flying characteristics, wide speed range, slow landings and precise aerobatics. An impressive scale Landing gear is also included with the kit. It is designed exclusively for this aircraft. It is a piece of engineering of its own. The Volcano is an easy-to-assemble, easy -to-fly blast for any pilot interested in large-scale flight. Functioning scale flaps make takeoffs and landings a breeze. Factory-created scale detail like the canopy, cockpit, pilot, control surfaces... Its authentic ORACOVER covering supplies a superior sheen. The VOLCANO ARF is part of PHOENIX MODEL's complete line of top-quality aircraft and accessories. Technical data - Wingspan: 2567mm (101in) - Length: 2190mm (86.2 in) - Flying weight: 11-13 kg - Wing area: 101 dm2 - Wing loading: 99g/dm2 - Wing type: Naca airfoils - Covering type: Genuine ORACOVER® - Retract gear type: Air-retract With CNC Suspension Metal Struts (included) - Spinner size: 115mm (included) - Radio: 6 channel minimum (not included) - Servo: 10 standard hi-torque servo: 2 aileron; 2 flap; 2 elevator; 1 rudder;1 retract; 1 throttle; 1 steering nose. (not included) - Recommended receiver battery: 6.0V 2400/2600mAh NiMH (2) (not included) - Servo mount: 21mm x 42 mm - Propeller: suit with your engine - Engine: 50- 60 CC gas engine (two stroke) (not included) - Motor: brushless outrunner 2600-3000 W, 190 KV (not included) - Gravity CG: 141 mm (5.5 in) Back from the leading edge of the wing, at the fuselage - Control throw Ailerons: Low: 12mm up/down, 10% expo; High: 15mm up/down, 10% expo - Control throw Elevators: Low: 12mm up/down, 12% expo; High: 15mm up/down, 12% expo - Control throw Rudder: Low: 30mm right/left, 15% expo; High: 45mm right/left, 15% expo - Control throw Flaps: Mid: 25mm down; Landing: 35mm down - Experience level: Intermediate - Plane type: Scale Military RECOMMENDED MOTOR AND BATTERY SET UP - Motor: Hacker A60 (not included) - Propeller: 22x10 E; 22x12 E APC (not included) - Lipo cell: 12 cells / 5500 – 6000mAh (not included) - Esc: 120-160A / HV (not included) Feature - Designed for compatibility with both GP and EP flight - Covered in genuine ORACOVER® - Separate fuselage and wing structure allows compact transportation - Extremely lightweight laser-cut all-wood construction - Air-retract With CNC Suspension Metal Struts included - Full-depth cockpit and instrument panel and pilot included - Scale plastic bomb included - Bolt-on two-piece wing for easy transport and setup at the field - Removable canopy for easy change lipo battery and set up radio - Superb flying characteristics, plus an accurate scale outline - High-quality hardware package included Colour chart • Light green (# 21042) • Blue (# 21050) • Cub Yellow (# 21030) • White (# 21010) • Black (# 21071) Packing BOX DIMENSION - 1244mm X 650mm X 388mm (L x W x H)

[Diamond-Models]

PHOENIX MODEL P51- MUSTANG 60CC SCALE 1:5 1/4 ARF http://www.diamond-models.gr/images/detailed_images/PH100---P51-Mustang-Chinh.jpg http://www.diamond-models.gr/images/detailed_images/PH100-P51-3.jpg http://www.diamond-models.gr/images/detailed_images/43c1f662-bc5d-4935-8038-8c8374599a9d-PH100-P51-7.jpg http://www.diamond-models.gr/images/detailed_images/c2457b97-b196-487a-bcd8-f9245f2750af-PH100-P51-39.jpg http://www.diamond-models.gr/images/detailed_images/e71bdbed-3311-4aa8-8d35-6fd53c1a6b0d-PH100-P51-32.jpg Introducing The P-51 Mustang was a solution to the clear need for an effective bomber escort. The Mustang was at least as simple as other aircraft of its era. It used a common, reliable engine and had internal space for a huge fuel load. With external fuel tanks, it could accompany the bombers all the way to Germany and back. Enough P-51s became available to the 8th and 9th Air Forces in the winter of 1943–44. For the ultimate, realistic flight experience, the P-51 comes with all-metal mechanical spring-loaded strut assemblies. The P-51 comes out of the box with all kinds of details that have been finished for the consumer, including a factory-painted fiberglass cowl, scale antenna, scale-shaped spinner, aluminum wheel hubs and much more. For a high-quality outer surface and realistic appearance, the P-51 is dressed with Oracover. Technical data - Wingspan: 2190mm (86.2 in) - Length: 1907mm (75 in) - Flying weight: 9-12 kg - Wing area: 92 dm2 - Wing loading: 98g/dm2 - Wing type: Naca airfoils - Covering type: Genuine ORACOVER® - Retract gear type: Air-retract With CNC Suspension Metal Struts (included) - Spinner size: P51 Mustang type, aluminum plate 115mm (included) - Radio: 6 channel minimum (not included) - Servo: 9 standard hi-torque servo: 2 aileron; 2 flap; 2 elevator; 1 rudder;1 retract; 1 throttle (not included) - Recommended receiver battery: 6.0V 2400/2600mAh NiMH (2) (not included) - Servo mount: 21mm x 42 mm - Propeller: suit with your engine - Engine: 50-60 CC gas engine (two stroke) (not included) - Motor: brushless outrunner 2600-3000 W, 190 KV (not included) - Gravity CG: 190 mm (7,48 in) Back from the leading edge of the wing, at the fuselage - Control throw Ailerons: Low: 15mm up/down, 10% expo; High: 20mm up/down, 10% expo - Control throw Elevators: Low: 15mm up/down, 12% expo; High: 20mm up/down, 12% expo - Control throw Rudder: Low: 40mm right/left, 15% expo; High: 60mm right/left, 15% expo - Control throw Flaps: Mid: 25mm down; Landing: 35mm down - Experience level: Intermediate - Plane type: Scale Military RECOMMENDED MOTOR AND BATTERY SET UP - Motor: hacker brushless A60 (not included) - Propeller: 22x12 APC E (not included) - Lipo cell: 12 cells / 5000 – 6000mAh (not included) - Esc: 120-160A / HV (not included) Feature - Designed for compatibility with both GP and EP flight - Covered in genuine ORACOVER® - Air-retract With CNC Suspension Metal Struts included - Retractable Tail Wheel with Gear Doors included - Full-depth cockpit and instrument panel and pilot included - Scale plastic bomb included - Bolt-on two-piece wing for easy transport and setup at the field - Removable canopy for easy change lipo battery and set up radio - Strong Light Weight Construction - Superb flying characteristics, plus an accurate scale outline - High-quality hardware package included Colour chart - White (# 21010) - Blue (# 21050) - Black (# 21071) - Silver (# 21091) Packing - Dimension (mm) * Box : 1539 x 595 x 283 * Cover carton : 1555 x 605 x 280

[Diamond-Models]

PHOENIX MODEL GENESIS .46-.55 SCALE 1:8 ARF http://www.diamond-models.gr/images/detailed_images/PH102-Genesis-Chinh.jpg http://www.diamond-models.gr/images/detailed_images/PH102-Genesis-2.jpg http://www.diamond-models.gr/images/detailed_images/PH102-Genesis-13.jpg http://www.diamond-models.gr/images/detailed_images/102-GENESIS-31.jpg http://www.diamond-models.gr/images/detailed_images/PH102-Genesis-26.jpg Introducing The most successful aircraft in air racing history. Phoenix proudly introduces the Genesis .46-.55 a quick to assemble, sport scale version for 50 sized power plants that is ready for high speeds and good flight performance. Technical data - Wingspan: 1533mm (60.35in) - Length: 1310mm (51.57 in) - Flying weight: 2.8-3.2 kg - Wing area: 29 dm2 - Wing loading: 105g/dm2 - Wing type: Naca airfoils - Covering type: Genuine ORACOVER® - Gear type: Mechanic retract With CNC Suspension Metal Struts and spring tail gear (included) - Spinner size: Plastic 70mm (included) - Radio: 6 channel minimum (not included) - Servo: 5 standard servo: 2 aileron; 1 elevator; 1 rudder; 1 throttle and 2 servo retract Futaba S3170G (not included) - Recommended receiver battery: 4.8-6V / 800-1200mAh NiMH (not included) - Servo mount: 21mm x 42 mm - Propeller: suit with your engine - Engine: .46-.55 / 2-stroke or .52/4-stroke glow engine (not included) - Motor: brushless outrunner 1000-1400 W, 480 KV (not included) - Gravity CG: 65mm (2.6 in) Back from the leading edge of the wing, at the fuselage - Control throw Ailerons: Low: 8mm up/down, 10% expo; High: 10mm up/down, 10% expo - Control throw Elevators: Low: 8mm up/down, 12% expo; High: 10mm up/down, 12% expo - Control throw Rudder: Low: 20mm right/left, 15% expo; High: 30mm right/left, 15% expo - Experience level: Intermediate - Plane type: Scale Civilian RECOMMENDED MOTOR AND BATTERY SET UP - Motor: RIMFIRE .46-.55 (not included) - Lipo cell: 4- 6 cells / 4000 – 5500mAh (not included) - Esc: 50-80A (not included) Feature - Designed for compability with both GP and EP flight - Covered in genuine ORACOVER® - Super Finishing Fiber Glass Cowl - Attractive Scale Colour Scheme - Mechanical retract With CNC Suspension Metal Struts included - Standard Installation For Engines With Muffler - Removable Top Hatch Makes Flight Battery Installation Easy for Electric Power Option - Factory Painted and Detailed Canopy - Plug in Wings for Convenient Transportation and Storage Colour chart - White (# 21010) - Blue (# 21050) - Cub Yellow (# 21030) - Corsair Blue (# 21019)

[Diamond-Models]

Graupner Flybarless system receiver GR-18+3xG+3A + Vario HoTT http://www.diamond-models.gr/images/detailed_images/%276-33579_gross.jpg%27.jpg Description With the GRAUPNER HoTT 2.4 GHz technology, the receiver has a new Hopping Telemetry Transmission high-frequency unit with state-of-the-art components and software. For reception, a hardware-aerial diversity system always switches to the better aerial signal and for transmission always uses the aerial that was last used for reception. This ensures that the return channel data are sent via the better positioned aerial. Without add-on sensors, the parameters receiver voltage and temperature, as well as signal strength are transmitted. 3-axis gyro + 3-axis acceleration sensors + Vario: Stabilization of the model aircraft in difficult wind conditions for up to 3 axes Natural flight behaviour thanks to proportional gyro offset adjustment Very good stabilization for tight flight figures Thanks to the 3-axis gyro, even aerobatic models that are difficult to master can be flown very comfortably; simplifying aerobatic flight extremely Flight figures can be flown very tightly Simple adjustment of gyro assignment Adjustment of the parameters via the HoTT telemetry Altitude sensor for vario-function and altitude Flybarless system for helicopters I2C interface for future addition of functions Specification Temperature range : - 15...+70 °C Aerial length: 2 x Draht 145 (Antenne 30) mm All-up weight, approx.: 14 g Frequency : 2400 ... 2483.5 MHz Range approx. : 4000 m Dimensions (LxWxH): 46 x 21 x 14 mm Modulation: 2.4 GHz FHSS Charging rate : 70 mA Operating voltage : (2,5) 3,6 ... 8,4 V Warnhinweis: Warnhinweis_14+_EN

[Diamond-Models]

Graupner Ultra DC Quad Charger 4 x 80 Watt 1-6s Li-po http://www.diamond-models.gr/images/detailed_images/S2007_Ultra_DC_Quad_02.jpg http://www.der-schweighofer.at/public/files/900/121589_Ladeger%C3%A4t_DC_ULTRA_DC_QUAD_GraupnerSJ_GmbH_S200779402_900.jpg http://www.der-schweighofer.at/public/files/900/89175_Ladeger%C3%A4t_DC_Power_Peak_Quad_EQ_BID_Robbe_Modellsport_GmbH__Co_KG_856538065_900.jpg http://www.der-schweighofer.at/public/files/900/89175_Ladeger%C3%A4t_DC_Power_Peak_Quad_EQ_BID_Robbe_Modellsport_GmbH__Co_KG_856538064_900.jpg Overview: Graupner/SJ "ULTRA DC QUAD" is a computer-controlled four-port balancer charger that features a high-performance microprocessor. The advanced software allows you to charge four batteries of varying types and numbers of cells simultaneously. The charger provides multiple charge programs and a balancer connection for up to 6 cells. Age recommended by manufacturer: 14 years and up Characteristics: Optimised operating software One display and one input keyboard per charger output Integrated balancer Balanced discharge Charge/discharge capability for LiPo/LiFe/LiIon, NiMH, NC, PB batteries Normal, fast and storage charge programs Automatic error detection and shut-off delta peak cut-off 10 x 4 programmable battery memories The Set contains: ULTRA DC QUAD charger EH to XH 6S Adapter Board and 6S Cable x 4 DC input cable Temp Sensor x 2 charge Cable(R, BK) Alligator Clip(R, BK) Manual Specification Dimensions (LxWxH) 225 x 170 x 40 mm Socket type DC Eingang XT-60 Artikelbild 1 S2007_Ultra_DC_Quad_01 Artikelbild 2 S2007_Ultra_DC_Quad_02 Artikelnummer S2007 Operating voltage DC: 11 ... 15 V Balancer socket 1-14 NiCd,NiMH/1-6 Lixx/1-6 Pb All-up weight, approx. 1012 g Input voltage External DC Power Supply 11-15 V Discharge current 4x(max.5W) 0,1 ... 1 A Capacity 4x 10 ... 9900 mAh Charge current 4 x (max.80 W) 0.1 ... 7 A WarengruppenNr 72

[Diamond-Models]

High Grade Aluminium Alloy Electric Retract SET (3 PCS) For Planes 5Kg-7Kg http://www.diamond-models.gr/images/detailed_images/21415210103545a64770c6bd.jpg Dimensions： 80mm*22mm*27mm Axles Diameter: 10mm Thickness： 3mm Weight: 67g Retract Controller： 1 with doors controler Wire Length: 300mm Motor:1215 brush motor Alu Electric Retract with Alu Strut and Electric Brake wheels Set of 3 for 5Kg-7Kg jet http://www.diamond-models.gr/images/detailed_images/41415212121545a6c592b54f.jpg Type: RLB-1 Eletric Retract: Three Units Length： 191.36mm Oleo Strut: Three Units front wheel: Singe/Double Totally Weight: 500g Electric Brake wheel: Two Units Jet Type: 5kg to 7kg Jet Contorller:1*Retract Contorller and 1*Brake Wheel Contorller Alu Oleo Strut set with two wheel nose strut D=10MM http://www.diamond-models.gr/images/detailed_images/JP%20Landing%20gear-3.jpg Type: Oleo Strut Size of Front Wheel: 40mm Diameter: 10mm \ Size of Main Wheel: 50mm to 65mm Length: 153mm Jet Type: 5kg to 7kg Jet Weight: 121g

[Diamond-Models]

J3 Cub EPO span 1400mm PnP by MaxThrust http://www.diamond-models.gr/images/detailed_images/141512995154592b5fb5ee2.jpg http://www.diamond-models.gr/images/detailed_images/~disp615x300-j3%20cub%202%20620.jpg http://www.diamond-models.gr/images/detailed_images/J3_cub_lrg.jpg http://www.diamond-models.gr/images/detailed_images/~disp615x300-j3%20cub%20620137224814751cad853a01e6.jpg With its large 1400mm (55.1“) wingspan, superb flight performance and durable EPOFLEXY construction, this J3 Cub is for the connoisseur! Optimised for use with 4S Li-Po batteries, the powerful brushless motor provides sufficient power for take-offs from the shortest flying strips. Featuring pre-installed servos, factory applied decals with oodles of scale detail and a choice of two authentic colour schemes. Assembled in a few hours, it makes a perfect sport-scale choice for the novice, but will be equally popular with experienced pilots seeking a realistic aircraft thatʼs not too demanding to fly. Whats Included The Plug and Play version of the Cub includes 4 servos (4x 9g), a brushless ESC and a brushless motor all pre-installed. To have this model ready for flight you will need a transmitter and receiver (4 channels or more) a Li-Po flight battery (14.8v 2250mAh) and a compatible charger. Features Decals Pre-Applied Durable EPOFLEXY Construction Powerful Brushless Motor Brushless ESC Scale Detailing Plug and Play This model comes complete just requiring your own transmitter, receiver, battery and charger. Wingspan 1400mm (55.1") Length 950mm (37.4") Weight 1800g (16.6oz) Servos 9g x 4 Recommended Battery 2250mAh 14.8v Li-Po